American Standard Circuits Installs Lenz DLG 550-2 Drilling Equipment


Reading time ( words)

American Standard Circuits has acquired two new pieces of Lenz equipment one of which is the DLG 550-2 drill machine.

“The DLG 550 is a great piece of equipment for us at American Standard Circuits because It gives us the capability to manufacture drilled micro vias down to 4 mils and improves our back drilling capability. It improves registration capability with its camera-based location and scaling optimization. This machine is equipped with full automation for round the clock operation and is one of the fastest drill machines available today. With these attributes, the equipment will allow us to not only drastically increase our technology level but also speed up our overall fabrication process. These improvements will allow us to better service our customers today and in the future,” said Anaya Vardya, president and CEO of American Standard Circuits.

About American Standard Circuits

American Standard Circuits (ASC) prides itself on being a total solutions provider, manufacturing quality rigid, metal-backed, RF/microwave, flex, and rigid-flex PCBs for the medical, automotive, industrial, defense, and aerospace markets in volumes from test and prototypes to large production orders. ASC has the expertise to provide a wide variety of technologies in a time-critical environment. Their qualifications include AS9100 Rev D, ISO 9001:2015, MIL-PRF 31032, MIL-PRF-55110, MIL-PRF-50884 certification and ITAR registration. In addition to manufacturing in the USA, ASC can transition and manage your PCB requirements to lower cost regions via its qualified supply chain of offshore partners. ASC also holds many key patents for metal bonding processes.  

Visit I-007eBooks to download your copies of American Standard Circuits’ micro eBooks today:
The Printed Circuit Board Designer’s Guide… to Fundamentals of RF/ Microwave PCBs
The Printed Circuit Designer's Guide to... Flex and Rigid-Flex Fundamentals

 

 

Share

Print


Suggested Items

How to Feed Test Data Back to Engineering for Process Improvement

08/01/2019 | Todd Kolmodin, Gardien Services
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.

A Guide to High-reliability PCBs from Design to Specification

07/24/2019 | Jeff Beauchamp, NCAB Group
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.

Nano Dimension CEO Gives Company Update

07/19/2019 | Nolan Johnson and Dan Feinberg, I-Connect007
Dan Feinberg and Nolan Johnson speak with Amit Dror, CEO of Nano Dimension, about recent company events and the company’s focus on high-mix/low-volume and agile local manufacturing.



Copyright © 2019 I-Connect007. All rights reserved.