Tech-Etch Inc. Installs 2nd atg A5NEO Flying Probe Technology for High-speed PCB Electrical Test


Reading time ( words)

atg Luther & Maelzer GmbH, confirms the order and installation of high-speed bare board testing technology for leading New England supplier of precision engineered parts to the medical device, aerospace, and instrumentation industries; including photo-etch and rigid-flex circuits.

The atg A5NEO, 8-head, double-sided, high-speed, high-accuracy flying probe test system has been ordered and installed by Tech-Etch, Inc. of Plymouth, MA. The new acquisition will enable Tech-Etch to expand capacity for its leading edge circuit technology while continuing its tradition of investment in its quality manufacturing program.

atg’s A5NEO testers utilize 8 test heads, four optical recognition systems, and a wide variety of advanced, high-speed electrical test measurement techniques to electrically test all types of PCB’s for continuity and isolation; including Flex and Ridged-Flex. The systems will test circuits up to 630 mm x 465 mm, with test points as small as 75 μm on 150 μm pitch. Special options, such as 4-wire Kelvin test, Hi-pot test, Latent defect test, and others can be provided.

About Tech-Etch, Inc.

Tech-Etch, Inc. began in 1964 as a small etching company in Boston, MA. For over 30 years, Tech-Etch has been manufacturing Flexible Circuits and Assemblies, supporting high reliability markets, including Medical, Aerospace, and Military. Over the years, Tech-Etch has grown and refined its capabilities to become the premier supplier of fine-line flexible circuits manufactured in the United States.

For more information visit www.tech-etch.com.

About atg Luther & Maelzer GmbH

atg Luther & Maelzer GmbH - With more than 150 employees worldwide, atg Luther & Maelzer is the leading supplier of electrical testing solutions for the Printed Circuit Board industry. We have solutions for every application regardless of product type, batch size, or technology deployed. Our atg flying probe tester products are renowned for automation, speed, accuracy, versatility, and ease of use; while the Luther & Maelzer universal grid tester product range is known worldwide for high throughput, repeatability, gentle handling, and precision accuracy.

For more information visit http://www.atg-lm.com.

Share

Print


Suggested Items

Dissecting the IPC Regional Survey on PCB Technology Trends

07/15/2019 | I-Connect007 Editorial Team
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.

Identifying Product Board Class and Pre-quote Software

07/09/2019 | Mark Thompson, CID, Prototron Circuits
Deciding on the class of the final product will determine what files are needed for fabrication and assembly. It is critical to note that for a product to be built to any class level, it must be designed to that class level from its inception.

Microtek Labs: Providing Trusted Testing in the Chinese Market

06/19/2019 | Barry Matties and Edy Yu, I-Connect007
On a recent visit to Microtek Laboratories' Changzhou facility, Barry Matties, publisher, and Edy Yu from the I-Connect007 China team spoke with chairman and CTO Bob Neves about the changes he has seen living and doing business in China over the past 15 years, and the increased importance of standards and testing as China moves into manufacturing more high-reliability products.



Copyright © 2019 I-Connect007. All rights reserved.