HannStar Board to Own 24% of Career Tech


Reading time ( words)

HannStar Board plans to acquire a 16% stake in fellow Taiwan-based PCB company Career Technology through a private placement, and obtain another 8% stake in Career Tech via a share swap.

HannStar Board will become the largest shareholder of Career Tech after owning 24% of Career Tech, said the PCB manufacturers. The share swap will also allow Career Tech to obtain a 6.5% stake in HannStar Board.

Share

Print


Suggested Items

Vertical Conductive Structures, Part 3: Design Tool Techniques

08/23/2019 | Ed Hickey and Mike Catrambone, Cadence Design Systems, and Joan Tourné, Nextgin Technology
New vertical conductive structure (VeCS) technology can reduce layer count and improve signal integrity without the need for sequential technologies. VeCS is different than traditional through-hole vias, microvias, and ELIC designs, which are more expensive and require a high number of laminations, drilling, and plating cycles to build up a reasonable number of layers.

How to Feed Test Data Back to Engineering for Process Improvement

08/01/2019 | Todd Kolmodin, Gardien Services
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.

Avoiding CAF Failures at the IPC High-reliability Forum

12/31/1969 | Andy Shaughnessy, I-Connect007
Foresite CEO Terry Munson recently spoke with Andy Shaughnessy during the IPC High-Reliability Forum and Microvia Summit in Baltimore about his presentation on the causes of conductive anodic filament (CAF), the dangers of resin starvation, and what advice he'd give to PCB designers to avoid those types of failures.



Copyright © 2019 I-Connect007. All rights reserved.