PV Nano Cell to Exhibit at IDTechEx 2019


Reading time ( words)

PV Nano Cell, Ltd., an innovative provider of inkjet-based conductive digital printing solutions and producer of conductive digital inks, today announced it will be exhibiting in the IDTechEx Show! the leading event for printed electronics, November 20th to 21st in Santa Clara, California. Visit Booth D11.

PV Nano Cell will launch in the exhibition its upgraded complete solution offering for the printed electronics, mass-production applications. The solution now includes printing cycles allowing customers to quickly test digital printing. The company will also discuss its new DemonJet Pro—low volume manufacturing printer and show its latest ink developments, and sample applications focused on mass production.

PV Nano Cell has designed and implemented a complete solution approach that allows customers to fully realize the potential of inkjet based electronics printing for mass production applications. PV Nano Cell’s Chief Executive Officer, Dr. Fernando de la Vega, commented, “We developed our complete solution approach after learning from our customers what their needs are and how to best serve them. We know customers can dramatically benefit from digital printed electronics only when a solution that includes the inks, printers and printing process is offered. To date, we have served countless customers using this approach and received wonderful feedback."

PV Nano Cell’s Chief of Business Development Officer, Mr. Hanan Markovich commented, "Companies interested in digital conductive printing often require initial testing and experimenting before adopting a full printing solution. This is why we now offer printing cycles. A printing cycle is meant to enable such companies and customers an affordable way to test digital conductive printing easily, quickly and efficiently. When the test results prove the viability, customers can proceed to use our complete solution."

PV Nano Cell is now selling its DemonJet printer to customers and will use the exhibition to discuss its new, upgraded, DemonJet Pro printer. This printer is meant for low volume manufacturing and offers high-throughput printing, camera-based registration, complete software automation and extreme accuracy in an unparalleled cost-performance bundle.

We encourage you to come visit us at our booth, discuss your needs and requirements and witness the power of PV Nano Cell's complete solution.

About PV Nano Cell, Ltd.

PV Nano Cell (PVN) offers the first-ever complete solution for mass-produced inkjet based, printed electronics. The proven solution includes PVN’s proprietary Sicrys, silver-based conductive inks, inkjet production printers and the complete printing process. The process includes ink properties' optimization, printer’s parameters setup, printing modifications and tailored printing instructions per application. In the heart of PVN’s value proposition lies its unique and patented conductive silver and coper inks—Sicrys. Those are the only inks made of single nano crystals—which allows the inks to have the highest stability and throughput required to drive optimal mass-production results for wide range of applications. PVN’s solutions are used all over the world in a range of digital printing applications including: photovoltaics, printed circuit boards, flexible printed circuits, antennas, sensors, heaters, touchscreens and other. For more information, please visit http://www.pvnanocell.com/

Share

Print


Suggested Items

Catching Up With RBP Chemical and Schlötter

01/20/2022 | Dan Beaulieu, D.B. Management Group
It’s always great to see two very good companies form a mutually beneficial alliance. I was lucky enough to watch this particular strategic partnership come to fruition this year between RBP Chemical and Schlötter. I wanted to talk to both companies, so I sat down with Matthias Hampel, global executive representative-PCB and electronics at Schlötter, and Ernest Litynski, president of RBP Chemical Technology, to get the inside story.

Real Time with... IPC APEX EXPO: Taiyo Focuses on Collaboration

01/12/2022 | Pete Starkey, I-Connect007
Don Monn, Midwest regional sales director at Taiyo America, reviews the progressive adoption of inkjet solder mask technology while acknowledging that liquid photoimageable mask continues as the mainstream process, with new developments in double-sided coating and vertical drying equipment. He comments on how Taiyo’s collaborative relationships with suppliers and customers have enabled logistics to be successfully managed through difficult times.

Insulectro Passionate About Educational Programs

12/10/2021 | I-Connect007 Editorial Team
Ken Parent, Chris Hunrath, and Michelle Walsh discuss their educational and training vision, programs that they are bringing to the industry, and why. There’s a gap, they say, in the talent pool from entry level to engineers. “There’s a huge demand now,” says Chris Hunrath. “The quicker we can fill that gap and train new people, the more PCBs can be built and more of the new products and technology will be accepted into the industry.” We are living in a people-constrained business today.



Copyright © 2022 I-Connect007. All rights reserved.