Ventec to Showcase High-Speed/High-Frequency and Advanced IMS Material Tech at Key US Expos


Reading time ( words)

Ventec International Group Co., Ltd. will be showcasing its latest high-reliability PCB materials at two key industry trade shows in the US this month. The Ventec US team will be in Santa Clara (CA) at PCB West on 10 September (Booth #508) and our thermal management & IMS specialists will be at the Electric & Hybrid Vehicle Technology Expo in Novi (MI) on booth #1351 from 10-12 September.

Ventec will once again be exhibiting at one of the industry’s most important exhibitions for printed circuit board design, fabrication and assembly in the US. The Ventec US team will be on booth #508 to present the company’s unique laminate & prepreg capability across a very wide range of applications and budgets—all supported by a fast and efficient global delivery promise through Ventec's fully controlled and managed global supply chain and world-class dependable technical support.

A key focus will be Ventec’s extended ceramic-filled hydrocarbon thermoset material series tec-speed 20.0. The range combines unrivaled high-frequency performance (Dk 3.00-3.48 / Df 0.002-0.0037), superior loss characteristics and highest reliability particularly demanded by 5G applications. The extended tec-speed 20.0 range is designed for the world's most demanding high frequency PCB applications and is already proving to be very popular with customers requiring high-performance, reliable and cost-efficient high frequency materials.

Electric and Hybrid Vehicle Technology Expo, Novi (MI)

From 10-12 September, visitors are invited to meet our thermal management & IMS specialists on booth #1351 to discover the latest advances in high performance IMS materials and thermally conductive prepregs and thin core laminates that deliver exceptional thermal performance, reliability and quality.

With the rise in new energy vehicles, automotive manufacturers around the world are already showing a keen interest and relying on Ventec's advanced range of high thermal conductivity, low-loss, heavy copper and black laminates, including:
  • VT-4B5 SP, an aluminum base laminate that ensures maximum thermal efficiency for direct-to-metal connections of electrically isolated heat sources and places dielectric insulation only where needed
  • VT-4B5L, a high performance IMS material that offers excellent solder joint reliability and thermal conductivity of 4.0 W/mK.
  • VT-4B5H, a metal base laminate material with high Tg (180oC) and thermal conductivity of 4.2 W/mK, ideally suited for applications such as LED lighting, power conversion, monitor drives and power supply
  • VT-4B7, a high performance IMS material for applications where maximum thermal conductivity and electrical performance are key. Specified at 7.0 W/mK, VT-4B7 is an affordably priced substrate that competes strongly with direct-bond copper (DBC)
About Ventec International Group

Ventec International is a premier supplier to the Global PCB industry. With volume manufacturing facilities in Taiwan and China and distribution locations and manufacturing sites in both the US and Europe, Ventec specializes in advanced copper clad glass reinforced and metal backed substrates. Ventec materials, which include high-quality enhanced FR4, high-speed/low-loss- & high-performance IMS material technology and an advanced range of thermal management solutions, are manufactured by Ventec using strict quality-controlled processes that are certified to AS9100 Revision D, IATF 16949:2016 and ISO 9001:2015, and are backed by a fully controlled and managed global supply chain, sales- and technical support-network. For more information, visitwww.venteclaminates.com.
 
Visit I-007eBooks to download your copy of Ventec micro eBook today:
The Printed Circuit Designer's Guide to...Thermal Management with Insulated Metal Substrates


Share

Print


Suggested Items

Solder Mask Tack Dry

11/08/2019 | Nikolaus Schubkegel
As a general rule, the tack-dry temperature should be as low as possible; in other words, it should only be as high as necessary. If the temperature is too low, the evaporation rate for the solvent will be to slow, and the solder mask will not dry in a reasonable amount of time. If the temperature is too high, however, the dry time certainly will be excellent, but it could create a solder mask lock-in with repercussions by the developing time.

Communication, Part 4: The Top 5 Causes of Engineering Delays

10/25/2019 | Steve Williams, The Right Approach Consulting LLC
In Part 4 of this series on how PCB fabricators and designers can better communicate, Bob Chandler from CA Design and Mark Thompson from Prototron Circuits address the top five causes of engineer delays.

New High-speed 3D Surface Imaging Technology in Electronics Manufacturing Applications

10/09/2019 | Juha Saily, Focalspec Inc.
Line confocal sensors—and scanners based on them—are used in the imaging of surfaces, transparent materials, and multi-layered structures in various metrology and inspection applications on discrete parts, assemblies, webs, and other continuous products. Line confocal sensors operate at high speed and can be used to scan fast-moving surfaces in real-time as well as stationary product samples in the laboratory.



Copyright © 2019 I-Connect007. All rights reserved.