RBP Chemical Technology to Exhibit at MD&M Show


Reading time ( words)

RBP Chemical Technology will be exhibiting at the MD&M Show taking place at the Minneapolis Convention Center, October 23-24. RBP continues to push the envelope with new developments in the cleaning, deoxidation and passivation of implantable medical devices. With over 25 years’ experience in the formulation of specialty processes, RBP’s scientists and engineers bring a wealth of technique and know-how.

There is no problem too small for RBP to solve with either its extensive product portfolio or specialty processes. If there is no direct fit for you, RBP’s team will work side by side with you to develop a customized solution to meet your needs.

Whether you need to clean and electropolish Nitinol, stainless steel, titanium or cobalt chrome, RBP Chemical Technology has the tools to help you meet FDA requirements.

Share

Print


Suggested Items

The Institute of Circuit Technology Autumn Seminar

10/03/2019 | Pete Starkey, I-Connect007
Meriden has been established as a popular Midlands venue for Institute of Circuit Technology (ICT) meetings. On September 19, a multitude of Fellows, Members, and Associates gathered for the Institute’s autumn seminar, which was organised and hosted by ICT Technical Director Bill Wilkie. The agenda included five informative technical presentations, describing current research and development on significant topics relevant to the industry.

The Advantages of Non-sludge Acid Copper Products

09/04/2019 | Barry Matties, I-Connect007
Mike Wood, technical director with Cerambus Asia Pacific, discusses the acid copper product from Cerambus Technology Inc. that doesn't generate sludge during the plating process and operates at higher production output by using higher current density. He talks about why this is important for the state of the vertical continuous plating (VCP) market in Asia, and the trends he’s seeing in that space.

Pollution Prevention Techniques: Rinse Water Reduction

08/30/2019 | Peter Moleux with contributions from Happy Holden
There are five general categories of common techniques for pollution prevention in a PCB fabrication facility: new processes to replace sources of pollution; extend the bath’s life; rinse water reduction; dragout reduction; and ventilation reduction. While this list is not all-inclusive, it provides an overview of the types of technologies used around the world that are important to consider. This article, examines rinse water reduction.



Copyright © 2019 I-Connect007. All rights reserved.