iNEMI’s PCBA Cleanliness End-of-Project Webinar Two Sessions Scheduled


Reading time ( words)

Join iNEMI to review the findings of PCBA Cleanliness project, which looked at the impact of cleanliness on PCBAs with bottom-terminated components (BTCs), with particular focus on ionic contamination levels. Using single-row QFN component packages as a representative example of a BTC, the team utilized clean and no-clean solder pastes and conducted various levels of cleaning (no-clean, water clean and solvent clean). They then conducted testing using methods such as SIR and ion chromatography in an effort to understand functional performance when residues are present underneath these packages.

Join the PCBA Cleanliness end-of-project webinar to review the results of this study. Two sessions are scheduled (October 7 & 8). The webinar is open to members and non-members; registration is required.

EMEA & Americas Session
PLEASE NOTE: This session re-scheduled from October 8
Monday, October 7, 2019
11:00 a.m. — noon EDT (US) / 5:00-6:00 p.m. CEST (Europe)
Register now

APAC Session
Tuesday, October 8, 2019
10:00-11:00 a.m. JST (Japan) / 9:00-10:00 a.m. CST (China)
Register now

Share

Print


Suggested Items

The Institute of Circuit Technology Autumn Seminar

10/03/2019 | Pete Starkey, I-Connect007
Meriden has been established as a popular Midlands venue for Institute of Circuit Technology (ICT) meetings. On September 19, a multitude of Fellows, Members, and Associates gathered for the Institute’s autumn seminar, which was organised and hosted by ICT Technical Director Bill Wilkie. The agenda included five informative technical presentations, describing current research and development on significant topics relevant to the industry.

The Advantages of Non-sludge Acid Copper Products

09/04/2019 | Barry Matties, I-Connect007
Mike Wood, technical director with Cerambus Asia Pacific, discusses the acid copper product from Cerambus Technology Inc. that doesn't generate sludge during the plating process and operates at higher production output by using higher current density. He talks about why this is important for the state of the vertical continuous plating (VCP) market in Asia, and the trends he’s seeing in that space.

Pollution Prevention Techniques: Rinse Water Reduction

08/30/2019 | Peter Moleux with contributions from Happy Holden
There are five general categories of common techniques for pollution prevention in a PCB fabrication facility: new processes to replace sources of pollution; extend the bath’s life; rinse water reduction; dragout reduction; and ventilation reduction. While this list is not all-inclusive, it provides an overview of the types of technologies used around the world that are important to consider. This article, examines rinse water reduction.



Copyright © 2019 I-Connect007. All rights reserved.