October 2019 Issue of Design007 Magazine Available Now


Reading time ( words)

The October 2019 issue of Design007 Magazine offers a snapshot of the PCB design segment as it exists today: the good, the bad, and everything in between. We think it’s safe to say that this is a pretty good time to be a PCB designer or design engineer. Likewise, this month’s Flex007 looks into the current landscape of flex and rigid-flex circuits.

The October 2019 issue of Design007 Magazine is now on the virtual newsstand, and available for delivery in your e-mailbox by subscribing here.

Share

Print


Suggested Items

John Michael Pierobon Discusses His Flex Design Class

10/01/2019 | Andy Shaughnessy, Design007 Magazine
If you’re new to flex design, you might want to check out an online course offered by All Flex, a flex fabricator. The course, Designing Flexible Circuits, was created by John Michael Pierobon. I asked John Michael to discuss his flexible circuit design course, and whether online curriculum can ever replace good old-fashioned live instruction.

Insulectro and DuPont Experts Talk Flex Design

09/25/2019 | Mike Creeden, CID+, Insulectro
I recently spoke with Insulectro’s Chris Hunrath and DuPont’s Steven Bowles at the DuPont Technology and Innovation Center in Sunnyvale, California. We discussed a variety of topics related to flex design, including the support structure that’s needed in flex design, the everchanging world of flex materials, and the need for working with a flex fabricator as early as possible in the flex design cycle.

Words of Advice: What are Your Biggest Design Challenges?

09/19/2019 | Andy Shaughnessy, Design007 Magazine
In a recent survey, we asked the following question: What are your biggest design challenges? Here are just a few of the answers, edited slightly for clarity.



Copyright © 2019 I-Connect007. All rights reserved.