RBP Chemical Technology Will Be Exhibiting at the MD&M Show


Reading time ( words)

RBP Chemical Technology will be exhibiting at the MD&M Show taking place at the Minneapolis Convention Center, October 23-24. RBP continues to push the envelope with new developments in the cleaning, deoxidation and passivation of implantable medical devices. With over 25 years’ experience in the formulation of specialty processes, RBP’s scientists and engineers bring a wealth of technique and knowhow.

There is no problem too small for RBP to solve with either its extensive product portfolio or specialty processes. If there is no direct fit for you, RBP’s team will work side by side with you to develop a customized solution to meet your needs.

Whether you need to clean and electropolish Nitinol, stainless steel, titanium or cobalt chrome, RBP Chemical Technology has the tools to help you meet FDA requirements.  

Share

Print


Suggested Items

CES 2020: Here We Are Again

01/07/2020 | Dan Feinberg, Technology Editor, I-Connect007
Here we are again at what is probably the largest and most fascinating technology event globally—CES. It is hard for me to believe that as a post-semi-retirement activity for me, I have been attending and writing about CES for over 20 years. The much progress that has taken place is immense, and the rate of change has also accelerated.

Calumet Electronics and Averatek Team Up on A-SAP

12/02/2019 | Nolan Johnson, PCB007
Nolan Johnson talks with Brian Hess of Calumet Electronics and Mike Vinson of Averatek about the new, insertable additive processes that the companies are working on together to help factories running primarily subtractive processes to quickly convert to very high-density interconnect (HDI) features, including trace and space from 2.5-mil line and space to 1-mil line and space and below.

Vertical Conductive Structures, Part 4: Tuning Your Signal Performance

11/18/2019 | Joan Tourné, NextGIn Technology BV
The objective of this article is to demonstrate the possibility of using a stitching element as an alternative to the point-to-point connections that are used with traditional via technology. Point-to-point connections have the best performance in terms of signal integrity (one via less in the connection that distorts the signal). A via is mainly a capacitive element that causes signal loss/ dispersion.



Copyright © 2020 I-Connect007. All rights reserved.