iNEMI Webinar on Survey Results for PIC Coupling


Reading time ( words)

iNEMI will be holding a webinar on October 30, which will review the results of the recent survey on edge versus vertical coupling to photonic integrated circuits (PICs), and discuss the development of a demonstrator module.

The survey was conducted as part of the ongoing Board-Level Optical Interconnect project, a collaborative effort between iNEMI and IPSR-I (Integrated Photonics Systems Roadmap-International). The responses helped identify which design and performance attributes are of greatest importance to PIC manufacturers and users.

This webinar will summarize the inputs received from across the supply chain, and results of the survey will be incorporated into the design specifications of an optical demonstrator module which the team is considering assembling in the next 24-month period.

For more information, click here.

Share

Print


Suggested Items

CES 2020: Here We Are Again

01/07/2020 | Dan Feinberg, Technology Editor, I-Connect007
Here we are again at what is probably the largest and most fascinating technology event globally—CES. It is hard for me to believe that as a post-semi-retirement activity for me, I have been attending and writing about CES for over 20 years. The much progress that has taken place is immense, and the rate of change has also accelerated.

Vertical Conductive Structures, Part 4: Tuning Your Signal Performance

11/18/2019 | Joan Tourné, NextGIn Technology BV
The objective of this article is to demonstrate the possibility of using a stitching element as an alternative to the point-to-point connections that are used with traditional via technology. Point-to-point connections have the best performance in terms of signal integrity (one via less in the connection that distorts the signal). A via is mainly a capacitive element that causes signal loss/ dispersion.

Flex Standards Update With Nick Koop

11/21/2019 | Andy Shaughnessy, Design007 Magazine
This month, I interviewed Nick Koop—director of flex technology at TTM Technologies, a veteran “flex guy” and instructor, and a leader of several IPC flex standards committees. Nick provides an update for the committees he’s involved with and discusses some of the challenges that he sees as more designers enter the world of flex.



Copyright © 2020 I-Connect007. All rights reserved.