Sun Chemical to Introduce New Solder Mask for High-temperature Automotive Applications at productronica 2019


Reading time ( words)

Sun Chemical will introduce its new Imagecure solder mask for high-temperature automotive applications during productronica 2019 in Munich, Germany from November 12-15, 2019.

The most recent addition to the most-used solder mask in Europe, withstands all the latest thermal cycling test criteria at -40°C/+180°C for 1000 cycles and -40°C/+170°C for 2000 cycles—a high specification test for printed circuits that must handle the stress caused by increased operating temperature requirements  being introduced in automotive applications.

Visitors of Sun Chemical’s booth located at Hall B3, Stand #481, will see firsthand the company’s DI solder mask for curtain coat applications—another example of Sun Chemical’s ongoing development of the Imagecure product range to meet the continually changing demands of the printed circuit board industry, along with all of Sun Chemical’s existing and new products for the PCB, PE and PV markets.

For more information, visit www.sunchemical.com or visit Sun Chemical at Hall B3/Stand 481 at productronica 2019 in Munich, Germany.

Share

Print


Suggested Items

EIPC Summer Conference 2019, Day 1

09/10/2019 | Alun Morgan, EIPC
The beautiful city of Leoben in central Austria provided the setting for the EIPC 2019 Summer Conference. In this article, EIPC Chairman Alun Morgan provides the highlights of the first day of the event, including a recap of the technical presentations.

How to Feed Test Data Back to Engineering for Process Improvement

08/01/2019 | Todd Kolmodin, Gardien Services
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.

Kelvin Characterization to Accurately Predict Copper Thickness

07/01/2019 | Article by Brandon Sherrieb, Integrated Test Corporation
A few years ago at Integrated Test Corporation, we found that the reaction plan for void fallout at electrical test was ineffective and not standardized. Like many PCB manufacturing facilities (including a Sanmina shop that I used to work at), the reaction plan consisted of cross section analysis to determine the void type.



Copyright © 2019 I-Connect007. All rights reserved.