Aismalibar to Attend productronica 2019


Reading time ( words)

As the only exhibition of this kind, productronica showcases the entire value chain in electronics manufacturing – from technologies and components to software and services. Approximately 45,000 professionals attended the conference in 2018 and it continues to grow each year.

After successful participation in the 2018 edition of productronica, Aismalibar will attend the Munich event and showcase its latest developments in IMS laminates, as well as the new range of automation for production of PCBs of the Technosystem brand. 

Aismalibar will be located in productronica Hall B3 with stand 351. In addition to offering personalized attention to all those who seek information, it will exhibit machinery from the Technosystem catalog, a brand of The Benmayor Group that develops technology and machinery for the production of PCBs. Aismalibar will also present its new range of loaders, unloaders and robots for the production of printed circuits.

Aismalibar will also showcase COBRITHERM ULTRATHIN 4W - TG180ºC - 150ºC MOT, an insulated metal substrate (IMS) based on an aluminum cladding with an ED copper sheet on the opposite side, containing an innovative ultra-thin polymer-ceramic dielectric layer of its own formulation, offering industry-leading thermal conductivity and high dielectric strength. It also offers strong MOT, high Tg and low CTE values, which are the key elements for performance of MPCBs operating at high temperatures.

The Thermal Multilayer product range will also be presented as well as products for the development of multilayer PCBs that can be combined to customize solutions for complex electronic designs and applications. THIN LAM and BOND SHEET can be used in standard multilayer lamination processes to improve resistance to thermal shocks, conductivity and thermal dissipation.

The new THIN LAM and BOND SHEETS of 3.2W have been developed to reduce thermal resistance. An MOT of 150ºC, high Tg values ​​of 180ºC and low CTE below 1.8% (50 to 250ºC) considerably improve the overall thermal efficiency.

About Aismalibar

AISMALIBAR is a manufacturer of copper clad laminates who produces high quality base materials for the PCB industry. AISMALIBAR was one of the first IMS laminate manufacturers in the world and was the first in Europe. 

Share

Print


Suggested Items

Communication, Part 4: The Top 5 Causes of Engineering Delays

10/25/2019 | Steve Williams, The Right Approach Consulting LLC
In Part 4 of this series on how PCB fabricators and designers can better communicate, Bob Chandler from CA Design and Mark Thompson from Prototron Circuits address the top five causes of engineer delays.

Why Designers Need to Be at the SMTA Additive Electronics Conference

10/18/2019 | I-Connect007
In a recent interview, Kelly Dack and Tara Dunn (Omni PCB president and conference co-chair) discussed why designers need to attend the SMTA Additive Electronics Conference. Tara will also be attending and moderating a panel discussion at the conference.

Additive Electronics Conference Set for October 2019 Debut

10/15/2019 | Kelly Dack
Kelly Dack and Tara Dunn talk about the upcoming conference "Additive Electronics: PCB Scale to IC Scale" on October 24, 2019, hosted by SMTA in San Jose, California, and why it's an important event for people to attend—especially those involved in the design process.



Copyright © 2019 I-Connect007. All rights reserved.