atg-Luther Maelzer to Exhibit at productronica 2019


Reading time ( words)

atg Luther & Maelzer GmbH, is looking forward to meeting with attendees at the upcoming productronia 2019 trade show in Hall B3 booth 203 at the Messe Munich.

The company will be showcasing their latest automatic Flying probe test system atg A8aL.

atg’s A8aL is able to test pad sizes down to 35 micron and is capable of testing HDI products for smart phones or tablet and Production panels up to a test area of 24.0” x 21.0” in manual and 19.0” x 16.5” in automatic mode. The A8aL eliminates limitations due to test point density or fine-pitch contacts and also features embedded component test, 4-wire Kelvin measurement capability with an accuracy down to +/- 0,025 mΩ, and latent defect testing. In combination with the fast test speed of up to 140 measurements/second, the A8aL provides a “lights-out” automated handling solution for batches up to 500 boards. To achieve high throughput the key feature of the A8a is a new dual shuttle system, which reduces the product exchange time to zero seconds in automation mode.

About atg Luther & Maelzer

With more than 180 employees worldwide and more than 2000 installations world-wide, atg Luther & Maelzer is a leading supplier of electrical testing solutions for the Printed Circuit Board industry offering Flying probe and Universal grid systems.

atg Luther & Maelzer’s parent company is Coho INC., which provides capital equipment, interface products, and services to the semiconductor, industrial, and electronics manufacturing industries. COHU offers a comprehensive portfolio of solutions and technologies, and a global network of strategically deployed applications and support resources. Additional information can be found at www.atg-LM.com or www.COHU.com

Share

Print


Suggested Items

EIPC Summer Conference 2019, Day 1

09/10/2019 | Alun Morgan, EIPC
The beautiful city of Leoben in central Austria provided the setting for the EIPC 2019 Summer Conference. In this article, EIPC Chairman Alun Morgan provides the highlights of the first day of the event, including a recap of the technical presentations.

How to Feed Test Data Back to Engineering for Process Improvement

08/01/2019 | Todd Kolmodin, Gardien Services
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.

Kelvin Characterization to Accurately Predict Copper Thickness

07/01/2019 | Article by Brandon Sherrieb, Integrated Test Corporation
A few years ago at Integrated Test Corporation, we found that the reaction plan for void fallout at electrical test was ineffective and not standardized. Like many PCB manufacturing facilities (including a Sanmina shop that I used to work at), the reaction plan consisted of cross section analysis to determine the void type.



Copyright © 2019 I-Connect007. All rights reserved.