Conductivity Laminate for High-frequency Applications


Reading time ( words)

During productronica 2019, the I-Connect007 Editorial Team met with some of the industry's top executives, managers, and engineers.

In this video interview, part of the productronica coverage, the I-Connect007 team speaks with Vitali Judin, area sales director with Rogers Corporation.

Editor Pete Starkey and Vitali Judin discuss how the company has responded to demands for high thermal conductivity combined with low loss in high-power RF applications with the newly launched. The PTFE-based TC350 Plus is capable of handling temperatures above 125°C and draws upon Rogers’ long experience with the TC350 material line-up. Vitali explains that processability is greatly improved with TC350, and that many design groups have been waiting for a material like this for some time.

The productronica event is one of the world’s leading trade fairs for electronics development and production. The productronica trade fair is held on alternating years, at the Messe München in Munich, Germany. The next productronica will be held November 16-19, 2021.

Watch video below:

Share

Print


Suggested Items

Decreasing Bend Radius and Improving Reliability- Part III

12/18/2019 | Kelsey Smith, All Flex
Application: Design guidelines to improve the flexibility and reliability of flexible circuits. Most issues that arise with flex circuits can be eliminated in the early stages of the design phase, and special planning must occur when the circuit is required to bend. Many novices will design a circuit that calls for bending the flex in too tight of a bend radius, which can cause damage to the circuit and lower the reliability of the end product.

Decreasing Bend Radius and Improving Reliability- Part II

11/22/2019 | Kelsey Smith, All Flex
Many of the issues that arise when using a flex circuit come from a lack of knowledge about how to properly design one, especially when the circuit is required to bend. Many novices will design a circuit that calls for bending the flex in too tight of a bend radius, which can cause damage to the circuit and lower the reliability of the end product. This series of articles will focus on the seven key aspects to consider when designing for maximum durability and maximum “flexibility.”

Technically Appropriate Material Choices Are Key to Success

06/25/2019 | Nolan Johnson, I-Connect007
Materials are no longer a passive part of the design; they play an active role in the manufacturability, reliability, and speed of a PCB. Editor Nolan Johnson and Mike Creeden, founder of San Diego PCB Design, discuss several key characteristics that designers should consider in their material selection process.



Copyright © 2020 I-Connect007. All rights reserved.