Ventec Invests in Key Equipment to Support Expansion of PTFE Laminates Manufacturing


Reading time ( words)

Ventec International Group Co., Ltd. has significantly increased its PTFE laminate manufacturing capabilities following a strategic investment in a new state-of-the-art high-temperature press and lay-up/break-down line at its Suzhou (China) manufacturing plant.

With 5G and evermore sophisticated radar applications, the demand and requirements for low loss/high frequency material is accelerating. Critical RF/Microwave-, antenna-, power amplifier- and sub-assembly-applications require superior electrical performance that can be delivered through PTFE laminates. To serve the increasing demand of these PTFE type products, Ventec has strengthened its investment in its Suzhou manufacturing plant to be even better positioned for the increase in demand and meet customers accelerated radar and 5G deployment requirements.

The most recent important equipment investment in a new state-of-the-art high-temperature press and lay-up/break-down line at Ventec’s Suzhou (China) manufacturing plant delivers a significant increase in manufacturing capacity to meet the growing demand for PTFE laminates. This includes the launch and roll-out of tec-speed 30.0 - Ventec’s latest ceramic filled high-speed/high-frequency PTFE material range that offers the highest signal-integrity characteristics for the most advanced high-frequency systems such as 77~79 GHz automotive radar systems.

tec-speed 30.0 (VT-3703) offers:

-       Dk 3.0 with extremely low Df (0.0009)

-       DK-stability versus temperature

-       Lower in-plane thermal expansion

The current Dk 3.0 tec-speed 30.0 version will be supplemented by Dk 6.15 and Dk 10.2 versions in the first half of 2020, offering an even wider range of options for applications such as automotive radar, cellular base stations, power amplifiers & antennas, global positioning satellite antennas, patch antennas for wireless communication or power backplanes.

Jason Chung, CEO said: "The investment and installation of the PTFE manufacturing line is yet another important piece of the puzzle in our global growth program. The addition of the line to our range of capabilities demonstrates to our customers our commitment to maintaining the most up-to-date manufacturing technologies that support our clients’ PCB design, development and manufacturing needs."

For more information about Ventec's solutions and the company’s wide variety of products, please visit www.venteclaminates.com.

About Ventec International Group
Ventec International Group Co., Ltd. (6672 TT) is a premier supplier to the Global PCB industry. With volume manufacturing facilities in Taiwan and China and distribution locations and manufacturing sites in both the US and Europe, Ventec specializes in advanced copper clad glass reinforced and metal backed substrates. Ventec materials, which include high-quality enhanced FR4, high-speed/low-loss- & high-performance IMS material technology and an advanced range of thermal management solutions, are manufactured by Ventec using strict quality-controlled processes that are certified to AS9100 Revision D, IATF 16949:2016 and ISO 9001:2015, and are backed by a fully controlled and managed global supply chain, sales- and technical support-network.

Share




Suggested Items

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.

EIPC Summer Conference 2022: Day 1 Review

06/28/2022 | Pete Starkey, I-Connect007
At last, a live EIPC conference and this time in the Swedish city of Örebro, “where history and contemporary culture converge,” a pleasant and convenient location for an event that included a privileged visit to the Ericsson facility in Kumla. Around 100 delegates made the journey and the Örebro Scandic Grand Hotel was an excellent conference venue for the June 14-15 conference.

PCB Plating Still Comes Down to Physics

06/21/2022 | I-Connect007 Editorial Team
We asked columnist Michael Carano to discuss the latest innovations in plating equipment and chemicals, as well as some of the drivers in this segment, and the biggest challenges and opportunities he sees in plating today. As Michael points out, despite all of the technological advances in this industry, process engineers still need a solid understanding of Faraday’s Law and Ohm’s Law to successfully plate PCBs.



Copyright © 2022 I-Connect007. All rights reserved.