GS Swiss PCB Invests in New Dynachem Vacuum and Press Lamination Lines Technology


Reading time ( words)

Automatic Lamination Technologies (ALT) under brand name Dynachem are pleased to announce that GS (Switzerland) advance substrate manufacturer has purchased and installed Dynachem latest developed Automatic Vacuum Press Lamination line AVPL Series 2 system. 

AVLP S2 is the new generation modular machine that provides customer an option to extend the system from single Vacuum stage to dual Flat Press stage lamination.

ALT – Dynachem is extremely pleased to have been selected by GS. We believe that our Dual Vacuum Press stages lamination can satisfy the high technology required in the current electronic industry, especially in the demanding substrate-manufacturing sector.

This latest AVLP line has the flexibility to manage either hot roll dry film lamination with substrate types down to 1mil core, vacuum dry film / solder mask lamination with R/Flex panel, complete coverlay lamination and curing, and vacuum & press ABF lamination for sequential build up technology.

In addition the new HMI software meets the industry 4.0 requirement (data log for every production batch are available) and it can support the SECS/GEM protocol mostly used in the semiconductors industry.

Please feel free contact us, see for yourself, and try out samples in demonstration facility.

Share

Print


Suggested Items

InduBond: Magnetic Induction Lamination

11/29/2019 | Real Time with...productronica
In this video interview, part of the productronica 2019 coverage, we spoke with Víctor Lázaro, R&D manager and technical director at Indubond. Víctor describes Indubond’s innovative methods for heating the boards to effect lamination through magnetic induction. Victor discusses the energy and operational efficiency that an induction method brings to the equipment: thermal profiles.

Multilayer Press Technology Using Magnetism to Produce Lamination Heat

11/11/2019 | Victor Lazaro Gallego, Chemplate Materials
A revolutionary concept in multilayer press technology has been developed that uses electromagnetic energy to heat the existing stainless-steel separator plates with a never-before dreamed-of accuracy and precision. The heating and cooling systems—embedded within a robust hydraulic press inside a vacuum chamber design—are controlled using a temperature feedback loop that guarantees perfect fidelity between the press recipe and the press result.

Why Designers Need to Be at the SMTA Additive Electronics Conference

10/18/2019 | I-Connect007
In a recent interview, Kelly Dack and Tara Dunn (Omni PCB president and conference co-chair) discussed why designers need to attend the SMTA Additive Electronics Conference. Tara will also be attending and moderating a panel discussion at the conference.



Copyright © 2020 I-Connect007. All rights reserved.