Solder in PCBA: Can’t Live Without It... or Can We?


Reading time ( words)

Solder is a marvelous material for joining metal parts together at relatively low temperatures. The first use of solder to join metals (mostly for adornments and some simple tools) came on the heels of the discovery of tin in Britain some 4,000 years ago, according to technology historians. The base metal and later simple alloy’s utility found for it an ever-expanding roll in civilization and industry for items as disparate as joining water piping, sealing automotive radiators, and making stained-glass windows. However, its crowning role for most of the last century has been for joining electrical and electronic elements of electronic products, from simple spliced wires to the most advanced chips and chip packages of the present day.

For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.

While the purveyors of prospective lead-free solder solutions asserted that they had everything under control, nothing could have been further from reality. After the rollout of the first high-temperature SAC alloys, the industry quickly found out how vulnerable their production lines and products really were. More than $100 billion has since been spent trying to find the equivalent of the tried, tested, and trusted tin-lead alloys.

One of the most frustrating things about the forced conversion was that the stated reasons for risk to all human health were massively overstated.

To read this entire article, which appeared in the February 2020 issue of SMT007 Magazine, click here.

Share

Print


Suggested Items

The iNEMI 2019 Board Assembly Roadmap

06/01/2020 | Pete Starkey, I-Connect007
iNEMI continues to publish chapters of its 2019 Roadmap and recently presented an overview of its Board Assembly Roadmap Chapter in a webinar prefaced by Grace O’Malley, vice president of global operations. The new chapter is just the latest addition to this global effort from 23 working groups contributing expert input from all aspects of the electronics industry.

High-reliability, Low-temperature Solder Alloys

05/18/2020 | Dr. Pritha Choudhury, MacDermid Alpha Electronics Solutions
Increased digitalization and greater connectivity have been driving miniaturization and more complex and integrated designs in electronics. As the real estate on PCBs shrinks, so does the size of packages. However, the drive for finding design solutions for increased performance has continued to expand. The solder joint is an essential part of assemblies for electronic devices as it provides electrical, thermal, and mechanical connections. Therefore, soldering materials have been evolving to enable such a technological revolution.

This Month in SMT007 Magazine: How Engineers Can Use SPI Tools for Verification

05/06/2020 | Nolan Johnson, I-Connect007
Koh Young’s Ray Welch and Brent Fischthal detail how engineers can work with SPI tools to verify how small they can go in component size with their solder paste application, and how the company’s SPI equipment is helping not only to verify but also to help drive the development collaboration between solder paste and stencil printer manufacturers, and inspection tools and software.



Copyright © 2020 I-Connect007. All rights reserved.