NCAB: A ‘Hub’ That Works With Designers From Start to Finish


Reading time ( words)

During IPC APEX EXPO 2020 in San Diego, California, the I-Connect007 Editorial Team met with some of the industry's top executives, managers, and engineers.

In this video interview from the show, Guest Editor Kelly Dack meets with Ruben Contreras, field applications engineer at NCAB Group, and Shaun Salas, key account manager.

Shaun and Ruben discuss a variety of ways to overcome challenges with tariffs and broker relationships, as well as emphasizing upstream expertise and how the company operates as a "hub." Part of NCAB’s objective is to work with designers and design engineers to make the board more manufacturable.

shaun_salas.jpg

IPC APEX EXPO is the largest PCB industry event in North America. The next IPC APEX EXPO will be held January 26-28, 2021, at the San Diego Convention Center.

To watch this interview, click here.

Share

Print


Suggested Items

Chapter 2 Excerpt from the Book ‘Thermal Management: A Fabricator's Perspective’

12/21/2020 | Anaya Vardya, American Standard Circuits
Insulated metal PCBs (IMPCB) or metal-clad PCBs (MCPCB) are a thermal management design that utilizes a layer of solid metal to dissipate the heat generated by the various components on the PCBs. When metal is attached to a PCB, the bonding material can either be thermally conductive but electrically isolative (IMPCBs or MCPCBs), or in the case of RF/microwave circuits, the bonding material may be both electrically and thermally conductive. The reason that RF designers usually have the bonding material thermally and electrically conductive is that they are using this not only as a heat sink but also as part of the ground layer. The design considerations are quite different for these different applications.

Happy Holden: ECWC15 Virtual Event a Success

12/15/2020 | Happy Holden, I-Connect007
This is the first Electronic Circuits World Convention that I have not attended in person since 1978. To refresh your memory, these are held every three years on a rotating basis. The HKPCA hosted this year’s conference and they kept up the fine tradition of collecting outstanding keynotes, nearly 60 technical presentations and myriad poster papers. HKPCA was also kind enough to provide English slides and translations. It is still possible to sign up and view the presentations. I have listened to 20 of the presentations, and hope to attend even more in the coming days as they are all worth watching.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

12/04/2020 | Andy Shaughnessy, Design007 Magazine
Around the holidays, we often see a slowdown in PCB design and manufacturing news. But this holiday season, there’s been no rest for the newsmakers in our industry! In the last week, our daily and weekly newsletters have been chock-full of breaking news and up-to-the-minute technical information that readers like you rely upon every day.



Copyright © 2021 I-Connect007. All rights reserved.