IPC APEX EXPO 2020 Attendees Speak: Travis Smith and Mindy Sanchez


Reading time ( words)

Travis Smith is a technical specialist and Mindy Sanchez is a manufacturing engineer, both with Ball Aerospace.

Kelly Dack: What have you both seen here at IPC APEX EXPO?

Travis Smith: I’m seeing a lot of great manufacturers and different equipment that’s available in the market, as well as new, emerging technologies. I’m learning a lot more about some of IPC’s standards and committees as well. It has been a fantastic week of educating ourselves for manufacturing processes going forward. And the IPC booth has a wealth of information.

Dack: What do you think about those pictorial examples they have in some of their specifications?

Smith: They’re great. I’m an IPC CID for a couple of different standards. I’m very familiar with all their standards. It’s nice to get to meet some of their staff, too.

Dack: Did you see any new standards over there or revisions that you weren’t familiar with?

Smith: Not yet. I was on a committee that was going over the training material for the next revision on the IPC-610, which is pretty exciting.

Dack: Thank you. There was one on designing for BGAs.

Mindy_Sanchez.jpgMindy Sanchez: I love that so much.

Dack: How did the show go for you, Mindy?

Sanchez: This is my first time attending IPC APEX EXPO. It has been really exciting. I just got back from the Hakko booth, where I built my own Game Boy controller, which was really cool. Seeing all the manufacturers here in one place and getting to see all the technology has also been great.

Dack: Excellent. Did you get to connect with lots of different types of vendors?

Sanchez: I’m in manufacturing, so we design in our shop and do the manufacturing, as well. It’s really great to be able to work with that. Seeing all the different manufacturers looking for equipment that we could use to help improve the technologies in our office is huge.

To see more comments by IPC APEX EXPO 2020 attendees, visit Show & Tell Magazine.

Share

Print


Suggested Items

Part 6 of Siemens’ Digital Twin Webinar Series: Single CAM Solutions

10/14/2020 | I-Connect007 Editorial Team
I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing” with Siemens' Jay Gorajia. In part 6, Gorajia discusses a “Single CAM Solution for All Process Engineering Tasks.”

Part 5 of Siemens’ Digital Twin Webinar Series: Managing the Digital Thread

10/07/2020 | I-Connect007 Editorial Team
I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing” with Siemens' Jay Gorajia. In part 5, Gorajia discusses “Managing the Digital Thread From Design to PCB Assembly Engineering.”

Real Time with… SMTAI 2020: Technical Conference Review

10/06/2020 | Real Time with...SMTAI
SMTAI 2020, which was converted to a virtual event, took place from September 28–30. I attend every year, but since there was no keynote in the virtual format, I went straight to the technical conference. This event covered a broad range of topics related to everything in assembly. Over 90 technical presentations are available, but this report covers just some of the sessions I attended.



Copyright © 2020 I-Connect007. All rights reserved.