Koh Young Update With Quintin Armstrong


Reading time ( words)

During IPC APEX EXPO 2020 in San Diego, California, the I-Connect007 Editorial Team met with some of the industry's top executives, managers, and engineers.

In this video interview from the show, Quintin Armstrong, Americas service and applications senior manager for Koh Young, updates Guest Editor Dick Crowe on Koh Young America's Technical Services Team, where the focus is on AOI of components and materials on the stuffed board, as well as demonstrations and training at their new facility in Duluth, Georgia.

IPC APEX EXPO is the largest PCB industry event in North America. The next IPC APEX EXPO is planned for January 26-28, 2021, at the San Diego Convention Center.

To watch this interview, click here.

Share

Print


Suggested Items

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Real Time with… SMTAI 2020: Technical Conference Review

10/06/2020 | Real Time with...SMTAI
SMTAI 2020, which was converted to a virtual event, took place from September 28–30. I attend every year, but since there was no keynote in the virtual format, I went straight to the technical conference. This event covered a broad range of topics related to everything in assembly. Over 90 technical presentations are available, but this report covers just some of the sessions I attended.

What Is Digital Twin Technology, and Why Is It So Important?

09/09/2020 | Happy Holden, I-Connect007
Happy Holden describes how Siemens' 12-part webinar series, “Implementing Digital Twin Best Practices From Design Through Manufacturing,” is an excellent series designed to educate the electronic manufacturing engineer on the progress of using a digital thread to improve products and performance.



Copyright © 2021 I-Connect007. All rights reserved.