Survey: Complete, Accurate Design Data Tops List of Fab Expectations


Reading time ( words)

In a recent survey, we asked PCB designers about expectations, particularly fabricators’ expectations of their PCB designer customers. The overwhelming majority (84%) of respondents indicated that a fabricator’s primary expectation of a designer is a complete, accurate data package.

A handful of respondents (6%) cited a solid understanding of the fabrication process, while even fewer (4%) said that fabricators expected frequent communication with their design customers.

Here are some of the survey comments, edited slightly for clarity:

  • “A complete and accurate data package is high on the list. Getting an approved stackup is another. Using the right trace and space rules for finished copper thickness. Basically, they expect us to provide a package that can be fabricated using their process that is not pushing the boundaries on every item.”
  • “Timely, correct, and cooperative feedback on issues discovered with a job.”
  • “Designers must be expert at managing and implementing high-speed design rules.”
  • “Fabricators expect us to have frequent communications.”
  • “A full, detailed manufacturing package, including special requirements.”
expectation_chart_710.jpg

 

Share

Print


Suggested Items

Autodesk’s Fusion 360 Merges ECAD, MCAD

05/28/2020 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy spoke with Autodesk’s Matt Berggren about the company’s Fusion 360 EDA tool and the new capabilities added to the software. Matt explains how Fusion 360 blends ECAD and MCAD functionality in one environment and at an affordable price, and why he believes it will help round out Autodesk's electronic portfolio with end-to-end capabilities.

Ventec Book Excerpt: Thermal Management with Insulated Metal Substrates

05/28/2020 | I-Connect007 Editorial Team
The following is an excerpt from Chapter 1 of "The Printed Circuit Designer's Guide to... Thermal Management with Insulated Metal Substrates," written by Ventec International Group’s Didier Mauve and Ian Mayoh. In this free eBook, the authors provide PCB designers with the essential information required to understand the thermal, electrical, and mechanical characteristics of insulated metal substrate laminates.

The Cost of Inefficient Production of PCB Documentation

05/13/2020 | Mark Gallant, DownStream Technologies
The following article is an excerpt from Chapter 5 of the I-Connect007 eBook The Printed Circuit Designer’s Guide to… Documentation, written by Mark Gallant of DownStream Technologies.



Copyright © 2020 I-Connect007. All rights reserved.