Freedom CAD’s Expert PCB Design Tips, Part 1


Reading time ( words)

When you’re designing complex PCBs, knowledge truly is power. The more PCB design tips, tricks, and techniques you know, the better your cutting-edge designs will be. With that in mind, we’re bringing you a series of PCB design tips, courtesy of Freedom CAD Services.

Design Tip #1
Don’t make high-current traces too thin.

When a PCB trace carries more than the standard multi-hundred milliamps, it must have enough copper weight to handle the increased temperature. Use a trace width calculator to determine the proper value for your board.

Want to know more? Check out the entire library of I-Connect007 micro eBooks. Scott Miller, chief operations officer of Freedom CAD Services, is the author of the eBook The Printed Circuit Designer’s Guide to… Executing Complex PCBs. This book provides a set of guidelines for designing the most complex, high-speed PCBs right the first time, every time. This book is a must-read for anyone designing today's sophisticated printed circuit boards.

Share

Print


Suggested Items

Autodesk’s Fusion 360 Merges ECAD, MCAD

05/28/2020 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy spoke with Autodesk’s Matt Berggren about the company’s Fusion 360 EDA tool and the new capabilities added to the software. Matt explains how Fusion 360 blends ECAD and MCAD functionality in one environment and at an affordable price, and why he believes it will help round out Autodesk's electronic portfolio with end-to-end capabilities.

Ventec Book Excerpt: Thermal Management with Insulated Metal Substrates

05/28/2020 | I-Connect007 Editorial Team
The following is an excerpt from Chapter 1 of "The Printed Circuit Designer's Guide to... Thermal Management with Insulated Metal Substrates," written by Ventec International Group’s Didier Mauve and Ian Mayoh. In this free eBook, the authors provide PCB designers with the essential information required to understand the thermal, electrical, and mechanical characteristics of insulated metal substrate laminates.

The Cost of Inefficient Production of PCB Documentation

05/13/2020 | Mark Gallant, DownStream Technologies
The following article is an excerpt from Chapter 5 of the I-Connect007 eBook The Printed Circuit Designer’s Guide to… Documentation, written by Mark Gallant of DownStream Technologies.



Copyright © 2020 I-Connect007. All rights reserved.