Just Ask Happy: Stacked Microvia Reliability Issues


Reading time ( words)

We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut, covering technology, the worldwide fab market, and everything in between. Enjoy.

Q: Stacked microvias look good on paper, but they may have reliability problems. What are the best rules for designing stacked microvias to ensure a reliable PCB?

A: The current best practice is stacking no more than two layers, and then moving over for the next buried or blind via or stacking two layers there. The stacked vias should never be stacked on any buried vias.

An IPC committee is currently testing various stacked via configurations to have a comparison for reliability and testing coupons and design. Hopefully, they will also get at the root cause of why stacked microvias are failing at their interface.

To pose your own question for Happy Holden, take the survey by clicking here.

Share

Print


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

08/14/2020 | Andy Shaughnessy, Design007 Magazine
This week’s picks include a little of everything. We have an interview with the founder of Avishtech, a new EDA software company that has a spin on field solvers and stackup tools. We also have an interview with Mike Carano, who discusses the need for mentors. Then, there’s news about partnership between Koh Young and Mentor, and an iNEMI "best practices" guide for disinfecting your facility. Finally, we've compiled all of the "Just Ask Happy" entries into a single document for your viewing pleasure. Happy Friday!

Just Ask Happy: The Exclusive Compilation

08/13/2020 | Happy Holden, I-Connect007
We asked for you to send in your questions for Happy Holden, and you took us up on it! We loved them so much, and we know that you did too, so we’ve compiled all 21 questions and answers into one document for easy reference.

This Month in Design007 Magazine: Dear Designers—Please Include a Sanity Check

08/11/2020 | I-Connect007 Editorial Team
We recently asked Rick Almeida, DownStream co-founder, and Technical Sales Manager Ray Fugitt to discuss why so many fabricators are still receiving (and correcting) inaccurate and incomplete data from their customers. And if fabricators and designers are content with this current process, is it really a problem after all?



Copyright © 2020 I-Connect007. All rights reserved.