Reference Standards are Important Product Expansion for Bowman Mexico


Reading time ( words)

Bowman Mexico, and RAISA, its distributor, have announced they will supply a comprehensive line of Reference Standards for all benchtop and hand-held XRF plating measurement systems.  Reference standards are a critical quality control tool for any manufacturer of products that are plated, and for contract plating shops that serve both manufacturers, and the printed circuit board / semiconductor industry.                      

According to Rob Coleman, Sales Manager for North America, Bowman Mexico will stock, for rapid availability, standards for ENIG and ENEPIG, (two common high-tech plating finishes) as well as thin precious metals, percent phosphorus, electroless nickel, chrome, zinc-nickel, and other common alloys.  The company will also provide custom standards.

Bowman Mexico has a fully staffed sales organization for Bowman XRF plating measurement systems, and a service and repair facility for all major makes and models of XRFs. In addition to new reference standards, Bowman Mexico re-certifies reference standards for every XRF instrument.

The Bowman Mexico team and RAISA have several decades experience in metal finishing and finishing quality control.  

Share

Print


Suggested Items

Real Time with… AltiumLive 2020: Würth Virtual Factory Tour

10/13/2020 | Dan Feinberg, Technology Editor, I-Connect007
Since AltiumLive this year is a virtual event, coverage is limited to watching some of the presentations virtually. Dan Feinberg describes how he was pleasantly surprised with the quality and excellence of the Würth virtual factory tour.

W. Edwards Deming’s Lost Chapters Recovered

08/12/2020 | Happy Holden, I-Connect007
I was cleaning up my bookcase recently and came across a tired, dog-eared set of papers that was Dr. Deming’s initial draft of his book "On The Management of Statistical Techniques for Quality and Productivity," which I received when he came to HP to lecture about quality and productivity on March 11, 1981.

Focus on the Impact of Data

07/08/2020 | Nolan Johnson, PCB007
Nolan Johnson recently spoke with Dana Korf about his experience with total quality management (TQM) throughout his career. Dana recommends not getting stuck on the process of collecting the data and documenting it, but instead to look at the impact. If you haven’t made an impact, then you haven’t done a good job.



Copyright © 2020 I-Connect007. All rights reserved.