Eltos Invests in Its PCB Production

Reading time ( words)

In recent weeks, Eltos, which is based in Arezzo, has continued to modernize and expand its machinery. The Turin-based machine manufacturer Pluritec supplied three machines for Eltos modern PCB production. Specifically, a second X-ray drill Inspecta Combo HP is suitable for exterior and internal layers that allows micro drilling and precise milling with or without local X-ray target detection and coordinate measurement. Also from Pluritec an X-Vision for X-ray inspection of multilayers and a milling machine Duo suitable for deep milling with  high-precision Z-axis control and optical alignment.

A high-performance cut sheet laminator SMARTLAM 5200 from Dynachem for inner layer production rounds off the current investments and expands the technical possibilities of Elto's very thin 25 micron inner layers without any problems.

"These investments in this challenging year strengthen Eltos technical ability to continue to reliably supply our customers with high-end printed circuit boards in the future," said Riccardo Pinamonti CEO of Eltos S.p.A. "and in October we will continue to invest with a new Direct Imaging Printer for the solder mask."

With around 100 employees in the High-Mix Low-Volumes segment and QTA Express Services, ELTOS S.p.A. produces professional printed circuit boards used in various areas, including medical technology printed circuit boards for ventilators, telecommunications, automation, safety, automotive, airspace, military and relevant European research institutions, especially CERN in Geneva and the Institute of Nuclear Physics in Italy. ELTOS was founded in 1980 in Arezzo, Tuscany, Italy.



Suggested Items

Benchmarking Your Process Engineering

04/29/2021 | I-Connect007 Editorial Team
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design. In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.

EIPC Technical Snapshot: 5G and Loss Minimisation

03/26/2021 | Pete Starkey, I-Connect007
Bringing a specialised technical area into sharp focus, this month’s topic was “5G and the understanding of loss minimisation at the PCB level,” with papers on dielectric material, copper foil, and modelling solutions. The webinar was moderated by EIPC board member Paul Waldner managing director of Multiline International Europa, who admitted that he had managed to get a haircut especially for the occasion!

PCB Requirements for E-Mobility

03/23/2021 | I-Connect007 Editorial Team
Nolan Johnson, Barry Matties, and Happy Holden speak with Christian Klein, section manager for PCBs in the automotive electronics division, about Bosch’s recent presentation on PCB requirements of the future in regard to automotive and electro mobility trends and challenges.

Copyright © 2021 I-Connect007. All rights reserved.