GLOBALFOUNDRIES Accelerating Innovation in IoT, Wearables
October 16, 2020 | GLOBAL FOUNDRIESEstimated reading time: 2 minutes
GLOBALFOUNDRIES®, the world’s leading specialty foundry, announced at its Global Technology Conference (GTC) EMEA event that it is accelerating innovation in the IoT and wearables markets with the specialized Adaptive Body Bias (ABB) feature of its industry-leading 22FDX® platform.
The ABB feature affords designers significantly more precision when fine-tuning the transistor threshold voltage of a circuit, enabling them to more effectively optimize the performance, energy efficiency, area, and reliability of a chip to meet the needs of a specific application. GF customers working in IoT, wearables, hearables, RF, and edge computing are leveraging ABB to further boost the efficiency of their designs by utilizing the 22FDX platform’s ultra-low power and low leakage capabilities.
“GreenWaves’ GAP IoT Application Processors are giving developers the ability to integrate sophisticated ultra-low latency, signal processing and artificial intelligence into highly energy constrained devices such as hearable and IoT sensor products,” said Loic Lietar, CEO of GreenWaves Technologies. “Our GAP9 IoT application processor is built on GF’s 22FDX platform. Our ability to take advantage of 22FDX’s adaptive body bias feature to narrow our sign-off margins was a significant contributing factor to optimizing our design for ultra-lower power consumption, toward our goal of empowering developers to bring the next generation of intelligent devices to market.”
“Perceive's edge inference processor, Ergo, brings the power of large neural networks to IoT devices while enhancing security and privacy. Thanks to its small size and ultra-high power efficiency, Ergo enables longer battery life, produces less heat, and allows for innovative product designs and packaging,” said Steve Teig, CEO of Perceive. “GF's 22FDX platform has a tremendous amount of horsepower, and its power advantages, low leakage, and adaptive body bias feature make it an excellent choice for IoT applications like ours.”
The ABB feature is another way GF is extending the value, high performance, ultra-low power, and broad integration capabilities of its 22FDX platform. To date, GF’s 22FDX platform has realized $4.5 billion in design wins, with more than 350 million chips shipped to customers around the world.
“With its best-in-class performance, power consumption, and broad feature integration capability, GF’s differentiated 22FDX platform is clearly the solution of choice for designers and innovators working in IoT, wearables, Edge AI, and other exciting applications,” said Mike Hogan, senior vice president and general manager of Automotive, Industrial and Multi-market at GF. “Empowering these customers to take advantage of the platform’s body biasing, and further increase the performance, efficiency, and battery life of their devices, is another example of how GF is enabling the industry to advance the frontier of connectivity toward a fully realized, global IoT.”
This wider use of ABB features is made possible and supported by GF’s strong ecosystem of IP and EDA tool partners, and body bias features are included in the 22FDX process design kit (PDK). Most mature, widely used modeling, design, and verification tools are readiness-tested to empower GF customers to leverage the 22FDX platform’s proven ABB features.
“GF’s ecosystem partners play a critical role in enabling designers to seamlessly and effectively implement ABB in their chips,” said Mike Cadigan, senior vice president of Customer Design Enablement at GF. “Through innovative IP and EDA tool support, GF’s ecosystem partners have created block IPs and end-to-end enablement flows for ABB, as well as static body bias, across a range of applications.”
Suggested Items
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Altus Group Helps BitBox Unlock Productivity and Efficiency Gains with New Reflow Oven
04/22/2024 | Altus GroupAltus Group, a leading provider of capital equipment, has recently assisted BitBox, a UK-based electronics design, engineering and manufacturing company in upgrading its operations with the implementation of a new reflow oven from Heller Industries.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.