Go Big: Limata’s X3000 Accurately Images Ultra-large, Flexible and Endless PCB Panels


Reading time ( words)

Limata, a provider of Laser Direct Imaging (LDI) systems for PCB manufacturing and adjacent markets, has launched the latest generation of its X3000 LDI system. This platform can handle the largest panels for dry-film patterning and solder mask imaging in PCB production without compromising on its highest precision standards in registration and resolution.

While standard PCB panel sizes have typically measured 24” x 18”, today there is an increasing demand for larger panels, often 24” x 36” or bigger, as well as a need to produce flexible PCBs in non-standard sizes. These large PCBs support a range of growing applications such as LED displays, 5G communications, aerospace and EV-automotive electronics. Using large PCBs instead of a combination of smaller boards delivers superior signal quality or lower signal attenuation in high frequency applications, while at the same time noticeably reducing assembly and installation costs.

Being able to handle large panel formats, up to 110" x 48", also means that the X3000 can simultaneously image multiple smaller PCBs in a single run, for example twelve standard 24" x 18" boards. This increases throughput, by reducing loading and unloading times, which further equates to reduced costs per panel. In addition, work processes can be set flexibly in manufacturing locations, since the X3000 can be loaded and unloaded from the front- and back-side.

"With the X3000, we have built an impressive system that can handle even the biggest oversize boards, whilst still retaining the outstanding accuracy of our X1000 and X2000 models," said Matthias Nagel, CTO of Limata. "In addition, the X3000 also supports roll-to-roll for the handling of endless flexible boards, with the largest PCB manufactured so far measuring 25 metres in length."

Auto-calibration
The X3000 model is market-proven and installed at multiple customer sites. This latest system generation further builds on the X-Series family's proven reliability, and utilizes an integrated auto-calibration system further delivering extremely high accuracy – unprecedented for a system of this size. The system improves registration quality with linear and nonlinear transformations, which are automatically applied in response to any distortion that it detects. In addition to PCB production, this accuracy makes the machine well-suited to applications such as chemical milling and industrial etching.

X3000 machine configurations are available with 2, 3 or 4 laser heads, providing a capacity of up to 24 ultra-violet (UV) lasers in total. A high resolution (HR) option provides an adjustable laser spot size for advanced HDI production, reliably handling dams and spaces down to 2 mil / 50 μm. The platform uses cost-efficient high energy UV diode-lasers that achieve lifetimes (MTBF) of over 25,000 hours, thus further reducing TCO.

Faster solder mask imaging
Like all X-series system platforms from Limata, for solder mask direct imaging tasks the X3000 can also be equipped with Limata’s innovative LUVIR technology, which uses a combination of UV and infrared (IR) lasers to reduce UV power consumption. Furthermore, this significantly increases the speed of solder mask (SM) direct imaging and achieves a TCO that is up to 40% lower than competing systems.

Share

Print


Suggested Items

Focus on Smart Processes, Not Just Smart Factories

03/02/2021 | Nolan Johnson, PCB007
Nolan Johnson talks to Audra Thurston, Todd Brassard, and Meredith LaBeau about how Calumet is focusing on smart processes, and not as much on smart factories. While modern manufacturing equipment and next-gen technologies can be impressive, so much innovation still hinges on human beings. Calumet believes by investing in their workforce and instilling a culture of innovation throughout their company and supply chain, they’ll see faster advancement.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

02/19/2021 | Nolan Johnson, I-Connect007
I’m following the landing procedures for NASA’s Perseverance Mars lander as I’m finishing my Top 5 list for the week. The successful landing of the lander seems a nice highlight for this week. Our global aerospace programs, both national and private enterprise, make these missions seem almost, almost routine. They are, as we all know, anything but routine. No surprise, then, that aerospace-related news percolated to the top of mind for our readers this week.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

02/05/2021 | Nolan Johnson, I-Connect007
Another active news week in the electronics industry! February is launching with a high-G burn, to be sure. And if you’re a fan of The Expanse, like I am, then you’ve probably already watched through to the Season 5 finale; this means you have attention to spare for industry news all of a sudden. And if you haven’t reached the current end of the line for The Expanse, then today’s list is just what you need while you catch up.



Copyright © 2021 I-Connect007. All rights reserved.