MacDermid Alpha to Promote Latest Technology Offerings at IECE


Reading time ( words)

MacDermid Alpha Electronics Solutions, a global electronics chemicals process supplier, will be exhibiting at the International Electronics Circuit Exhibition hosted by the Hong Kong Printed Circuit Association. The show will be held from December 2-4, 2020 at the Shenzhen Convention and Exhibition Center, China.

MacDermid Alpha will be featuring its complete portfolio of metallization technologies from the MacDermid Alpha brand for HDI designs that provide a continuous metalurgical structure for the most demanding requirements in micro via reliability. MacDermid Alpha will also showcase its product offerings that enable 5G from start to finish from all three divisions and four brands. Also highlighted will be the recently released processes in the IC Substrate market; Systek SAP – high performance build-up processes, Systek UVF 100 – via fill and fine line plating for 2-in-1 RDL applications, and Systek ETS 1200 – pattern plating metallization for embedded trace substrates.

Interested participants can stop by booth, 2M13, to talk to our industry experts about the latest offerings from MacDermid Alpha.

Find out more at MacDermidAlpha.com or email us at techinfo@macdermidalpha.com.

About MacDermid Alpha Electronics Solutions:
Through the innovation of specialty chemicals and materials under our Alpha, Kester, Compugraphics, and MacDermid Enthone brands, MacDermid Alpha Electronics Solutions provides solutions that power electronics interconnection.  We serve all global regions and every step of device manufacturing within each segment of the electronics supply chain.   The experts in our Semiconductor Solutions, Circuitry Solutions, and Assembly Solutions divisions collaborate in design, implementation, and technical service to ensure success for our partner clients.  Our solutions enable our customers’ manufacture of extraordinary electronic devices at high productivity and reduced cycle time.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

09/23/2022 | Andy Shaughnessy, Design007 Magazine
It’s officially fall now, and in Atlanta the temperature has plummeted to the mid-80s. We’ve all bumped our air conditioners up to 74 degrees. That means it’s trade show season, and I’ve been busy looking for my suitcase. This week, we have an assortment of news about associations, education, and advocacy, as well as another installment of our Printed Electronics Roundtable. And if you’re looking for a job, you are in luck; our jobConnect007 section is chock-full of open positions at all levels in this industry.

IPC: Companies Are Intentional About Tracking Environmental and Social Risks

09/22/2022 | Suhani Chitalia and Kelly Scanlon, IPC
Leading companies in the electronics manufacturing industry are highly intentional about their environmental, social and governance (ESG) priorities, with climate change and energy use among the most closely scrutinized issues, an IPC analysis shows. As part of IPC’s ESG for Electronics initiative, IPC is interested in developing resources for members on the most common ESG methods and priorities of leading companies across the electronics value chain. In support of this, IPC has preliminarily analyzed the ESG reports of approximately a dozen companies in selected portions of the industry.

EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics

09/22/2022 | Pete Starkey, I-Connect007
“Summer is over, now it's back to work!” This was the opening line of the invitation to the 18th EIPC Technical Snapshot webinar, Sept. 14, following the theme of advances in automotive electronics technology, introduced and moderated by EIPC President Alun Morgan. The first presentation, entitled "The fully printed smart component—combining additive manufacturing and sensor printing," came from Jonas Mertin, a thin-film processing specialist at the Fraunhofer Institute for Laser Technology.



Copyright © 2022 I-Connect007. All rights reserved.