PC Technological Advances in 2020

Reading time ( words)

With CES quickly approaching—which is perhaps the largest technology event globally that is also going virtual this year—key component and sub-assembly companies are not waiting to announce their next generation of components. Here, I will detail new components and performance advances, as well as why you should consider building your own PC.

For the last few months, new-generation announcements have been released, and new component introductions have been made at a rate not usually seen. Companies like AMD for both central processing units (CPUs) and graphics processing units (GPUs), NVIDIA for GPUs, Intel for CPUs, and partner suppliers—such as ASUS, Gigabyte, MSI, EVGA, and others, including some new market entries—are all in the game and playing to win with advanced capabilities and amazing higher performance. Finally, with everyone becoming more competitive, stable, or—in some cases—providing even lower prices, the results are a generally improved value-to-price ratio.

For those of you who care about attaining high PC performance—such as for the latest games with ray tracing and XR capabilities, advanced high-end photo and video work or AI capabilities, or perhaps you just want or need the latest, most capable, fastest upper-end computer—it a good idea to know the difference between the last generation or two of components and what has recently been or is about to be announced.

If you are going to build your own or update your computer’s components, this information is critical, but even if you are just going to go to Micro Center, Best Buy, or even Costco, it is a good idea to know the difference between this year’s Intel i7 CPU and the i7 chip from 2018. Same name? Yes, but there’s absolutely a performance and capability difference!

Usually, the only way to get all the latest components is to build it yourself. You can wait for the next generation of your favorite brand if you prefer to purchase a completed rig, but you still should know about the new components to be sure that you are not just buying a new release that uses mostly last-generation components.

Another advantage in DIY is that if a new component that you want to upgrade to is released, you can usually upgrade without having to buy a totally new computer. Some brands of computers, usually the higher-end ones, can also be upgraded, but many cannot.


Let’s look at some of the newly released components, starting with GPUs. Last month, I covered the release of the new NVIDIA RTX 3000 series. These devices are sporting amazing capabilities. Now, if you are using a 1080p 60 Hz refresh rate monitor, there’s no need to even consider one of these. After all, why put a 400 hp engine in a golf cart?

But if you have gone or want to go to 4K and/or multiple HDR monitors, you may want to go to XR. Then, you are one of those waiting in line to get one of these beasts. And yes, the first batches sold out in minutes, and over a month after they were announced, they are still almost impossible to find in stock. AMD has also hinted that their latest and greatest GPU, the “Big Navi” series, will also be released soon.

For years, NVIDIA has dominated the high-end GPU market, with one result being that the prices for each new generation have increased significantly. This time, with the latest AMD version coming out and with the significant improvement in the performance of AMD devices—such as the Ryzen and Threadripper CPUs which have given Intel a significant run over the last few years—it appears that NVIDIA was taking no chances and they have kept the prices on their new RTX3000 series to a very attractive value point. There’s nothing like true competition to increase the rate of improvement and to keep prices reasonable.

Speaking of CPUs, for the last 10 years or so, Intel had dominated, and their prices for their higher-end CPUs went sky high. Then, AMD introduced the Ryzen and Threadripper series of GPUs. These were good performing devices at a much lower price point. Over the last few years, they have continued to improve. The latest versions are equal to and, in some cases, higher performing than Intel’s offerings, and as you would then expect, Intel’s latest offerings are available at a lower price than they set a year or so ago.

In this case, AMD seems to have gained the lead and may be pulling further ahead. AMD is now using a 7-nm process, which has allowed them to design more powerful and capable chips in a similar-sized package, while Intel, finding itself losing momentum, is still apparently having to use their now somewhat outdated 14-nm manufacturing process. Intel is still the market share global leader in all categories, but in the DIY market, AMD seems to have taken the lead.


AMD has reached 20.1% of the desktop PC market, notching its highest penetration since the fourth quarter of 2013. AMD has also grown its desktop PC market share for 12 consecutive quarters. Per Toms Hardware, "A bit more than 60% of AMD's increased desktop shipments came from high-end units.” With Apple now planning on using its own silicon instead of Intel, they seem to have a market share challenge approaching.


Suggested Items

Today’s M&A: Right on Target

08/09/2022 | Nolan Johnson, I-Connect007
In this enlightening conversation with M&A specialist Tom Kastner, Nolan Johnson learns that it’s a buyer’s market—and a seller’s market too. This sets up an interesting dynamic no matter which side you might be on. What trends are in play that have led to this situation and how can you make the most of it? Tom shares valuable insights that will get you thinking and planning your own strategies.

Challenges of the 2022 PCB Market: The Party’s Over

08/08/2022 | Pete Starkey, I-Connect007
With his knowledgeable insight into the business and technology of the printed circuit industry, Dr. Shiuh-Kao Chiang, managing partner at Prismark Partners, has put a global perspective on the challenges of the 2022 PCB market. His presentation at the EIPC Summer Conference in Orebro, Sweden, on June 14 was eagerly awaited by an attentive audience, keen to share his vision. From his comments, it was clear that 2022 will be an interesting year and does not appear particularly friendly for the PCB business.

Plating on Silver: What’s Old is New Again

07/07/2022 | Denis Jacques, Technic Inc.
About three decades ago, immersion silver, a nitrate-based process, gained a lot of market share in the world of PCB final finishes. More economical than ENIG, flat, solderable, and conductive, it had everything going for it—everything but corrosion resistance in a harsh environment, that is. Champagne voids were also an issue, along with line reduction. But the worst drawback, the characteristic that made the part short over time, was creep corrosion. A build-up of copper sulfide salt that grows in contact with a sulfur-rich environment, heat, and moisture resulted in failures in the field. This was enough to scar the process for good.

Copyright © 2022 I-Connect007. All rights reserved.