IPS Expanding to Accommodate Growing Market


Reading time ( words)

I recently had the opportunity to visit IPS in their Cedar City, Utah, facility, where Mike Brask, founder and president of IPS, shared his business strategy and gave me a tour of the expanding manufacturing facility. IPS produces a wide range of PCB manufacturing equipment, including plating, DES, VCM, VRPs, ventilation, and spare parts for older equipment.

As I toured the facility, it was easy to see there was plenty of work on the manufacturing floor. IPS now employs around 60 people and has integrated a number of automated tools in the manufacturing process. By doing this, he has optimized material usage and increased product quality.

To facilitate the evolving business plan, Mike expanded his manufacturing space with a new 17,000-square-foot addition to provide the space needed to accommodate the increased business and to carry IPS into the future. Here, I share my interview with Mike.

IPS_expands.jpg

Barry Matties: Mike, let’s start with an overview of IPS, please.

Mike Brask: In 2008, IPS made a conscious business decision regarding what’s best for our customers in North America. Our customers want American-made machines, and when those machines need parts and service, we can respond immediately. IPS is a multi-product, multi-industry supplier within North America. IPS pushed harder to build that North American market and branch out into not just the circuit board industry but also to get into the aerospace equipment, general metal finishing, and semiconductor wet benches, where domestically, we’re getting paid U.S. wages to afford our healthcare and expenses of living in the U.S.

That business plan is what we’ve been executing since 2008. We have not only recognized the need for a Customer Service Department over the years, but we have also realized the need to develop skilled labor. I have been building up that staff to be able to support our level of manufacturing. My wife would like me to vacation more, but I love what I do, and with over 35 years of experience, I have something to offer.

The first thing was building and developing the infrastructure of key people. Now, we have five mechanical engineers doing SolidWorks and drawings, as well as four electrical engineers and two programming engineers. We have a production manager and a quality control manager. We have added more service technicians, and the whole idea is to be that company that can get the parts out and get the techs to the job site.

Last year we made the decision to add 17,000 square feet of space, so we have built up the engineering infrastructure and floor space. We have added more staff to the production and fabrication area, but the existing building is going to be all material prep. It will be cut, tack, weld, sub-assemblies, and then the new 17,000-square-foot space will be assembly, so that’s what we are doing. We have a 44,500-square-foot factory now to support our North American market. We are prepared to deliver on time, which I am very proud to say.

And then COVID-19 hit.

IPS_tech.jpg

Read the full interview in the November 2020 issue of PCB007 Magazine.

Share

Print


Suggested Items

This Month in PCB007 Magazine: The Copper Foil Market Is Anything But Flat

11/18/2020 | Nolan Johnson, PCB007
Nolan Johnson interviewed Mike Coll, COO of Denkai America, about the copper foil and substrate market, the recent acquisition of the company by Nippon, and what they’re doing to respond to very small feature sizes.

I-Connect007 Editor's Choice: Five Must-Reads for the Week

11/06/2020 | Andy Shaughnessy, Design007 Magazine
This past week, we published a variety of articles, interviews, and columns—and readers definitely made their favorites known. There was good news about hiring and staffing. (In case you were wondering, there are quite a few open positions in this industry right now.) We touched base with a pair of young engineers to get their thoughts on what it’s like for recent grads working in the PCB manufacturing community. We learned about a company’s new program that can help take some of the stress out of NPI. We also launched a new chapter in our “Just Ask” series, this time starring columnist Tara Dunn. And there was sad news that a contract manufacturer’s chairman had just passed away.

Just Ask John Mitchell: The Exclusive Compilation

10/05/2020 | I-Connect007 Editorial Team
We asked for you to send in your questions for IPC President and CEO John Mitchell, and you took us up on it! We know you all enjoyed reading these questions and answers, so we’ve compiled all of them into one article for easy reference. We hope you enjoy having another bite at the apple. And if you’d like to hear more from John Mitchell, view his column series “One World, One Industry.”



Copyright © 2021 I-Connect007. All rights reserved.