Flex CCL Supplier Taiflex Posts Strong Results in December


Reading time ( words)

Taiflex Scientific Co. Ltd, a Taiwanese manufacturer of flexible copper clad laminate (CCL) material for flex PCBs, has reported consolidated revenue of NT$782 million ($27.9 million at $1:NT$28.02) for December 2020, up by 18.5% from December 2019 figures. Its Electronics Materials (EM) division, in particular, registered sales of NT$764 million ($27.26 million), an increase of 20.6% year-on-year.

For the full year 2020, Taiflex achieved total revenue of NT$8.77 million ($312.89 million), up by 15.6% year-on-year.

Share




Suggested Items

Michael Carano: A Focus on Process Control, Part 2

09/28/2022 | I-Connect007 Editorial Team
In this second half of our conversation, Michael Carano discusses some of the metrics that fabricators need to consider before investing in new processes, especially process control technologies, and some of the challenges board shops face updating brownfield sites.

Catching Up With John Johnson, New Director of Business Development at ASC

09/28/2022 | Dan Beaulieu, D.B. Management Group
It’s always good to catch up with old friends, especially when you can start working together. I recently spoke with my friend John Johnson, who has joined American Standard Circuits as the director of business development. At ASC, John will be using the Averatek A-SAP process that he was previously involved with. He shares some of his background and provides insight on the best ways to use this semi-additive PCB fabrication process that opens the capability window for forming trace and space.

A Focus on Process Control, Part 1

09/27/2022 | I-Connect007 Editorial Team
Michael Carano is a noted subject matter expert with respect to process control, electroplating and metallization technology, surface finishing, and reliability. So, it was only natural that we sat down to talk about mechanizing an existing facility given today’s fickle environment. Will any of the CHIPS funding trickle down to bare board fabrication? What process can be adjusted on the factory floor? The focus needs to be more than just on manufacturing and getting work out the door, he says, but also process control.



Copyright © 2022 I-Connect007. All rights reserved.