EIPC Technical Snapshot: Supply Chain and Material Price Pressures

Reading time ( words)


The subject of Bottazzi’s presentation was the growth in electric vehicles (EV) and its impact on the supply of electrodeposited (ED) copper foil to Europe. Global sales of battery-electric vehicles (BEVs) were growing rapidly, with Europe leading the market in 2020 and China close behind. Because of COVID, the total global market for vehicles had decreased by about 14% in 2020, but the proportion of electric vehicles had continued to increase. China was by far the largest market for EVs, and 51% growth was predicted for 2021, although forecast percentage growth was substantially higher for Germany, France, and the UK.

All these EVs would need batteries, so what were the projected demands for copper foil for the production of lithium-ion batteries (LiBs)? Bottazzi’s figures were frightening—China would require 50,000 tons in 2021. The projections grow to 125,000 tons in 2023, and 200,000 tons in 2025, when one-third of new car sales will be electric. The corresponding figures for Europe were 35,000 tons in 2021, rising to 150,000 tons in 2025. The number of Giga-factories in Europe was forecast to increase by 26 between now and 2030, with a total annual production capacity of 650 Giga-watt-hours-worth of lithium-ion batteries, and consuming 260,000 tons of copper foil.

And it is not just batteries themselves—they needed charging! Between 1 kg and 7 kgs of copper is required to equip each charging station, of which there are presently 400,000 in Europe. One million will be needed by 2024, rising to 3 million by 2029.

Bottazzi showed a graph of battery-foil imports into Europe during 2019 and 2020, indicating a rise from less than 700 tons to over 1,500 tons per month between January and December 2020. During this period, the price of copper on the London Metal Exchange had risen from less than $5 per kilogram to around $9.6 per kilogram, although the current price was slightly lower because of profit-taking by speculators.

So, who is making copper foil in Europe? As Morgan had said earlier, the only remaining manufacturer of foils for the PCB industry is Circuit Foil in Luxembourg, and Francois Bottazzi put a meaningful perspective on the situation. Circuit Foil’s production is primarily focused on supporting the high-end electronics market in Europe, especially 5G and millimetre-wave applications, with an annual capacity of 10,000 tons, and plans to expand to 13,000 tons in 2022. The company has a factory in Hungary dedicated to the production of battery foil, currently 10,000 tons but with substantial expansion planned to 25,000 tons in 2023, and 75,000 tons in 2025.

Morgan introduced the final speaker, from another manufacturer of copper foil... and glass yarn... and glass cloth... and epoxy resin... and copper clad laminates... and PCBs: Nan Ya Plastics Corporation, a division of Formosa Plastics Group. Andreas Folge is responsible for 5G OEM marketing of copper-clad laminates in Europe for Nan Ya’s Electronic Materials Division. He set out to answer the question, “To which extent 5G will have an impact on the actual worldwide copper-clad-laminate supply situation?” from the perspective of a major producer with a vertically integrated structure.


Folge began with a brief overview of the Nan Ya Electronic Materials Division and its scale of operation. It has a 20% share of the global market for glass fabric, a 19% share of the global market for copper foil, a 17% share of the global market for epoxy resin, and a 13% share of the global market for FR-4 copper-clad laminate (CCL). Complete vertical integration ensures consistency of product performance.

He commented that the present worldwide market situation was unprecedented in his past 20 years of experience. All of Nan Ya’s raw material and CCL manufacturing plants in China and Taiwan have been fully loaded for months; order intake is still strong and already covered almost their entire second-quarter production; and the raw material and CCL inventories of major industry players worldwide are at the lowest level within the entire supply chain. Further increases in production lead times are expected worldwide, especially for non-standard materials, and capacity loadings will remain high for the coming months, with all manufacturers focusing on maximising output and producing high-margin products for key market segments. The low inventory levels will continue, and worldwide logistic supply chain troubles will have a further negative impact, mainly outside Asia. The overall effect will be that the seller's market will continue.

Having established the realities of the world-wide supply situation for copper-clad laminate, Folge reviewed the current and forecast levels of activity in world communications. His statistics indicated that there were more than 4.5 billion active internet users worldwide, using mainly mobile devices. In addition, more than 1 billion people have some sort of computer connected to the internet. The combination of mobile and fixed traffic is now measured in exabytes (EB), with one exabyte equal to one billion gigabytes. In 2019, the figure was about 180 EB per month, and this is forecast to grow at 20% CAGR to 560 EB per month by 2025. It was clear that the world needs wired and wireless infrastructure and devices for high speed, high volume, ultra reliable, low latency, secure data communication and storage.

5G is seen as the enabler and is expanding rapidly around the globe, although Folge stressed that presently the world is only at the beginning of the 5G business cycle. The strongest growth segments were already in networking, cloud computing, data centres, gaming, and smart consumer electronics. Wired and wireless infrastructure equipment have become a key driver for market transformation, increasingly focused on special multilayer boards and high-end packaging substrates, driven by high-speed, high-frequency and high-thermal demands.

5G will force innovation, having significant impact on existing interconnection concepts and necessitating a fundamental transformation in PCB requirements involving miniaturisation, loss reduction, integration, and thermal management. Standard FR-4 laminates will no longer be appropriate; 5G will require application-specific laminates using high-end raw materials: advanced resin systems, improved glass formulations and weave characteristics, foils with reduced surface roughness, modified crystalline structure, and enhanced barrier layer composition. The manufacture of such materials is more difficult and more specialist, and they will inevitably be more expensive.

As he had previously stated, Folge expects the seller's market to remain, with an ongoing tight supply situation worldwide although Nan Ya is making substantial investment in additional production capacity for foil, glass fabric and laminate in China and Taiwan. The outlook was that 5G-related infrastructure and device demand would continue to increase, with the 3C (consumer, communication and computer) market segment remaining very strong, and automotive and industrial following. Folge believes that once the 5G infrastructure is built and the data centre investment cycle is complete there will be a shift back to smart and portable consumer products.


EIPC’s well-balanced selection of complementary presentations inspired a dynamic question and answer session, which Alun Morgan expertly moderated. The presenters were joined in high-level discussion by Mark Goodwin, chief operating officer at Ventec International Group, an expert in logistics, and advocate of the benefits of working with a vendor that owned the supply chain and could offer flexible solutions adaptable to changing customer demands. There was a very candid exchange of ideas and experiences, and complete agreement with Morgan’s appeal for the sharing of forecast information along the supply chain, especially in Western Europe and North America, where lower volumes, high mix and quick turn were the demand drivers.

A final salutary remark from Morgan: “If you don’t use the European supply chain, you won’t have it anymore!”


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

06/24/2022 | Nolan Johnson, I-Connect007
Market news was certainly big this week. While the U.S. stock market continues make some large swings, the PCB and PCBA are doing their own dance with the numbers. We’re still feeling the effects of the pandemic, but it seems to be more about playing catch up. Still, the industry is showing some instability, both in positive and negative ways.

PCB Technologies’ InPack to Focus on Miniaturization, Packaging

05/16/2022 | Andy Shaughnessy, Design007 Magazine
I recently spoke with PCB Technologies’ Jeff De Serrano, Yaniv Maydar, and Alon Menache about their new venture, InPack. They explain their plans to focus on advanced packaging, miniaturization, and other high-end technology, with much faster time to market, and they offer a view of the global market as well.

EIPC Technical Snapshot: Supporting Autonomous Driving

05/12/2022 | Pete Starkey, I-Connect007
EIPC’s 17th Technical Snapshot webinar on May 4 focused on developments in automotive electronics, particularly on advances in the technologies required to support the evolution of autonomous driving. The team brought together two expert speakers to present their detailed views on topics encompassed within “CASE,” the acronym that appears to be taking over the automotive industry.

Copyright © 2022 I-Connect007. All rights reserved.