CIPSA Circuits Finds Success with Ucamco’s Ledia Direct Imager

Reading time ( words)

In January of 2021, Barcelona based CIPSA Circuits installed a Ledia direct imager from Ucamco along with an autoloader from Techno System - Benmayor. The early results are very satisfactory, much to the delight of Nuria Vidal, General Manager at CIPSA:

"Our company is specialized in the production of printed circuit boards, manufactured according to the specifications and requirements of our customers. CIPSA produces the whole range of printed circuit, from prototype to mass production. Keeping up with the latest trends and evolutions is key in our field.”

Vidal continued, “The perspective of the new Ledia, which is without a doubt the most cost-effective direct imaging solution on the market - trust me, we have done very thorough research - in combination with the new autoloader, looked highly promising and has not disappointed at all. Ever since the installation of our newest hardware, everything has been running smoothly. It is too early to name numbers, but the new products have undoubtedly boosted our productivity by a big margin.”

“The service provided by Ucamco and Benmayor has been nothing short of great. We are looking forward to continuing this great partnership in the future."



Suggested Items

Just Ask Happy: Is PCB Fab Returning to the U.S.?

07/27/2020 | I-Connect007 Editorial Team
We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut by covering technology, the worldwide fab market, and everything in between. Enjoy.

Joe O’Neil: Green Circuits Running Strong Under Current Social Restrictions

06/01/2020 | Nolan Johnson, PCB007
On May 28, Joe O’Neil, CEO of Green Circuits, updated Nolan Johnson on how the company continues to operate during the COVID-19 restrictions. O’Neil reflects on the rapid chain of events this past March when lockdowns were instituted in the San Francisco Bay area. After a brief but rapid shutdown, Green Circuits was back up and in production.

iNEMI’s PCB Roadmap Explained

05/01/2020 | Pete Starkey, I-Connect007
In an informative and enlightening webinar, iNEMI Project Manager Steve Payne was joined by Isola Group CTO Ed Kelley to explain, review, and discuss the details of the recently published “iNEMI 2019 Roadmap for Organic PCBs.” Pete Starkey provides an overview.

Copyright © 2021 I-Connect007. All rights reserved.