Prototron Circuits Upgrades Via Fill, Planarization Capabilities

Reading time ( words)

Prototron Circuits has expanded their via fill and planarization capabilities by adding an ITC THP32 Via Fill machine and a Pola e Massa Evolution 3000 Planarizer to their via fill equipment room.

Prototron Circuits' President Dave Ryder stated, “We are on track to completely upgrade our facility and adding improved via fill and planarization capability is only the first step. We are in the process of also adding new Schmoll high tech drilling machines to our drill room and a maskless direct imaging system to our imaging department. This is all part of bringing our facility to the next level which will allow us to provide our customers with the latest PCB technology, both today and in the future.”

About Prototron:

With over 30 years in business, Prototron Circuits is one of the industry leaders when it comes to High Technology Quick Turn Printed Circuits boards. Their continued outstanding performance (98%+ Quality and Delivery) has made them a true preferred source of all companies needing reliable QTA PCBs. And now with their new global sourcing solution, Prototron Circuits is truly America’s board source. 

Prototron is located in Tucson, Arizona. For more information go to



Suggested Items

A Conversation with Canice Chung, TTM Technologies

12/09/2014 | Barry Matties, I-Connect007
We had the opportunity to sit down with Canice Chung, Executive Vice President of TTM Technologies, Inc. to discuss the current trends and challenges of PCB Manufacturing in China.

A Conversation with Laurent Nicolet, Schmid Group

12/07/2014 | Barry Matties, I-Connect007
During the HKPCA & IPC Show 2014, Laurent Nicolet, VP - PCB Business Unit of Schmid Group took a few minutes to discuss the automation technology that was on display and share the changes he's seen in the China market.

Thin PCBs for Smart Phones: Technology and Reliability Considerations

11/19/2014 |
The next generation of smartphones will demand very thin multilayer boards to reduce product thickness. This paper shows three different manufacturing approaches which can be used for very thin, any-layer build-ups. The technological approaches are compared on reliability level--the any-layer copper filled microvia technology which is to be considered state-of-the-art for high-end phones and the ALIVH-C/G technology well established in Japan.

Copyright © 2021 I-Connect007. All rights reserved.