AT&S’ Growth Continues Unabated in Q1 21/22


Reading time ( words)

AT&S recorded a very positive revenue development despite unfavourable negative currency effects in the first quarter of 2021/22.

“Digitalisation continues to drive the demand for our technologies. Markets that showed temporary weakness are increasingly recovering. Strategically, we are still fully on track. The production of IC substrates in particular is running at full speed. The implementation of the capacity expansion in Chongqing is making excellent progress. The first parts of the production equipment have already been qualified as well as be put into operation,” says CEO Andreas Gerstenmayer.

Consolidated revenue rose by 28% to € 317.7 million in the first quarter of 2021/22 (PY: € 247.9 million). Adjusted for currency effects, the increase in consolidated revenue even amounted to 37%. The additional capacity and growing demand for ABF substrates made a significant contribution to revenue growth. The development was supported by the broader application portfolio for mobile devices and the demand for printed circuit boards for modules. In the AIM segment, all three areas contributed to revenue growth. Although the Automotive segment nearly doubled its revenue after a very weak first quarter of the previous year, the shortage of semiconductors will continue.

EBITDA increased from € 39.5 million to € 46.3 million. The improvement in earnings is predominantly attributable to the increase in consolidated revenue. Currency fluctuations of the US dollar and the Chinese renminbi had a negative impact of € 18.1 million on the earnings development. In addition, temporary start-up costs for the IC substrate production in Chongqing were incurred. On the market side, a change in product mix in the Mobile Devices segment had a negative effect on profitability.

AT&S continues its efforts to make the company future-proof by intensifying investments in the organisation as well as in research and development. Investments of € 31.3 million were made during the reporting period (previous year: € 22.4 million) to prepare for future technologies and pursue the modularisation strategy, among other things. Adjusted for the start-up effects of the Chongqing project, EBITDA amounted to € 50.8 million.

The EBITDA margin amounted to 14.6% (adjusted EBITDA margin: 16.0%), falling short of the prior-year level of 15.9% (adjusted EBITDA margin: 16.5%). EBIT declined from € 0.2 million to € -0.4 million. The EBIT margin amounted to -0.1% (PY: 0.1%). Finance cost – net improved from € -5.9 million to € -3.1 million, which is primarily attributable to the positive change in exchange rate differences. Loss for the period improved by € 2.6 million from € -7.9 million to € -5.3 million, primarily due to the improvement in finance cost – net.

The financial position was characterised by an increase in non-current assets at the end of the reporting period. Total assets rose to € 2,515.7 million, up 5.3% on 31 March 2021 as a result of additions to assets and technology upgrades.

Equity declined by -0.4% compared with 31 March 2021 and amounted to € 798.6 million, which was primarily earnings-related. The equity ratio decreased by 1.8 percentage points to 31.7% and temporarily fell below the medium-term target of 40.0%. This is attributable in particular to the increase in total assets as a result of investments and securing the financing of the future investment programme.

Cash and cash equivalents rose to € 560.7 million (31 March 2021: € 552.9 million). In addition, AT&S has financial assets of € 16.2 million and unused credit lines of € 328.5 million to secure the financing of the future investment programme and short-term repayments.

Share

Print


Suggested Items

A Conversation with Canice Chung, TTM Technologies

12/09/2014 | Barry Matties, I-Connect007
We had the opportunity to sit down with Canice Chung, Executive Vice President of TTM Technologies, Inc. to discuss the current trends and challenges of PCB Manufacturing in China.

A Conversation with Laurent Nicolet, Schmid Group

12/07/2014 | Barry Matties, I-Connect007
During the HKPCA & IPC Show 2014, Laurent Nicolet, VP - PCB Business Unit of Schmid Group took a few minutes to discuss the automation technology that was on display and share the changes he's seen in the China market.

Thin PCBs for Smart Phones: Technology and Reliability Considerations

11/19/2014 |
The next generation of smartphones will demand very thin multilayer boards to reduce product thickness. This paper shows three different manufacturing approaches which can be used for very thin, any-layer build-ups. The technological approaches are compared on reliability level--the any-layer copper filled microvia technology which is to be considered state-of-the-art for high-end phones and the ALIVH-C/G technology well established in Japan.



Copyright © 2021 I-Connect007. All rights reserved.