ThinFlex Posts Lower October Sales


Reading time ( words)

Flexible copper clad laminate (FCCL) manufacturer ThinFlex Corp. has registered sales of NT$155.22 million ($5.58 million at $1=NT$27.81) for October, down by almost 25.8% from the previous month, and down by 34% from the previous year.

For January to October, ThinFlex posted total sales of NT$2.25 billion ($80.96 million), down by 5.35% compared with the same period last year.

Share




Suggested Items

Engineering RF Dielectric Material to Enable 5G/6G Antenna Devices

04/11/2022 | Chudy Roosevelt Nwachukwu, ITEQ Corporation
Accurate characterization of frequency-dependent inhomogeneous dielectric material properties is key to the optimal design of high performance and cost-effective PCB antennas. These antennas will be required to enable the plethora of devices forecasted for 5G/6G communication. Therefore IT-88GMW, an advanced resin system reinforced with tightly woven thin glass fibers has been formulated to improve the Q-factor of interconnects and passive components fabricated on PCB laminates.

Improved Thermal Interface Materials For Cooling High-Power Electronics

03/31/2022 | Jeff Brandman, Aismalibar North America
Heat has been a significant concern in electronics since the beginning of the electronics age when hot glowing vacuum tubes were first used to receive and transmit data bits. The transistor and integrated circuit effectively solved that basic problem, but increases in integration resulted in increased concentration of heat, exacerbated by relentless increases in operating frequency. While improvements in electronics technology have been able to mitigate many thermal issues at chip level thanks to improved semiconductor designs devised to operate at lower voltages (thus requiring less energy) the thermal management challenge continues to vex electronic product developers.

Institute of Circuit Technology: A Novel Approach to Recycling PCBs

03/10/2022 | Pete Starkey, I-Connect007
A two-year project funded by an Innovate UK SMART Grant aims to reduce the impact of e-waste using naturally derived, biodegradable and nontoxic products. Those attending the webinar for the Institute of Circuit Technology’s annual meeting on March 2 learned more about the project, as well as statutory paperwork obligations of the UK REACH regulations. Following the formal business, ICT Chair Emma Hudson introduced and moderated this technical webinar.



Copyright © 2022 I-Connect007. All rights reserved.