American Standard Circuits Utilizes Averatek Process for Medical Technology


Reading time ( words)

Mr. Anaya Vardya, President and CEO of American Standard Circuits recently discussed how using the Averatek A-SAP™ process allows his company to better service their medical electronics customers.

When commenting on this process Mr. Vardya explained, “Our medical electronics customers depend on us to provide them with the most reliable PCBs possible. When dealing with medical products it is not hyperbole to say that it is always a matter of life or death. With the A-SAP™ manufacturing process ASC can now provide our customers with ultra high-density technology, 25 micron trace and space, and improved reliability, reducing layer counts and micro via lamination cycles, ultimately simplifying the design.  Other advantages include improved signal intergrity, aspect ratios greater than 1:1 for metal traces and extremely tight tolerances.  Specific to medical technology, this process is not limited to copper conductors and enables the use of gold as a conductive metal to deliver bio-compatibility advantages.  In many instances the reduced layer count allows for improved costs which we then pass on to our medical customers. It’s a win-win situation for both of us.”

Visit I-007eBooks to download your copies of American Standard Circuits’ micro eBooks today:
The Printed Circuit Designer’s Guide to... Fundamentals of RF/ Microwave PCBs
The Printed Circuit Designer's Guide to... Flex and Rigid-Flex Fundamentals
The Printed Circuit Designer’s Guide to... Thermal Management: A Fabricator’s Perspective

And be sure to check out Realtime with... American Standard Circuits to learn more!

About American Standard Circuits
American Standard Circuits (ASC) prides itself on being a total solutions provider, manufacturing quality rigid, metal-backed, RF/microwave, flex, and rigid-flex PCBs for the medical, automotive, industrial, defense, and aerospace markets in volumes from test and prototypes to large production orders. ASC has the expertise to provide a wide variety of technologies in a time-critical environment. Their qualifications include AS9100 Rev D, ISO 9001:2015, MIL-PRF 31032, MIL-PRF-55110, MIL-PRF-50884 certification and ITAR registration. In addition to manufacturing in the USA, ASC can transition and manage your PCB requirements to lower cost regions via its qualified supply chain of offshore partners. ASC also holds many key patents for metal bonding processes. For more information about American Standard Circuits' services or to ask one of their technology experts a question go to www.asc-i.com.

 

 

Share




Suggested Items

Review: Institute of Circuit Technology 2022 Annual Symposium

06/15/2022 | Pete Starkey, I-Connect007
The British Motor Museum in Warwickshire, housing the world's largest collection of historic British cars, was venue for the 2022 Annual Symposium of the Institute of Circuit Technology on June 8, which attracted a substantial gathering of manufacturers and suppliers from the UK printed circuit industry. ICT chair Emma Hudson reflected upon lessons learned during the pandemic lock-down and how the industry has successfully adapted to circumstances. She commented that the UK’s PCB fabricators are extremely busy, as she introduced an outstanding conference programme including a keynote from the incomparable Happy Holden.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

06/03/2022 | Andy Shaughnessy, Design007 Magazine
Things are heating up in the world of PCB design and manufacturing as well. In the past week, we published quite a bit of news—some good, some not so good. Some of the news is mixed, as we see with the EMS industry shipments rising YOY in April, but falling from the previous month. It’s nice to see NASA investing in American small businesses, but they didn’t really have a choice, did they?

PCB Technologies’ InPack to Focus on Miniaturization, Packaging

05/16/2022 | Andy Shaughnessy, Design007 Magazine
I recently spoke with PCB Technologies’ Jeff De Serrano, Yaniv Maydar, and Alon Menache about their new venture, InPack. They explain their plans to focus on advanced packaging, miniaturization, and other high-end technology, with much faster time to market, and they offer a view of the global market as well.



Copyright © 2022 I-Connect007. All rights reserved.