Gardien Group Offers Inductance and 4-Wire Kelvin Testing


Reading time ( words)

Along with 4-Wire Kelvin, available on the G Series Flying Probes, Gardien now offers Inductance Testing/Henry measurement for applications like Coils, Transformers, Heater Circuits and Embedded Coils on their Flying Probe Testers (FPT).

Although standard Electrical Test will provide capture of an open circuit on a primary or secondary of an embedded coil, it cannot determine if the winding has shorted to itself.  Using theories behind 4-Wire Kelvin, which is applied in high resolution measurements, Gardien can now perform accurate inductance measurements of coils, heater traces and other hybrid circuits where inductance measurements are critical.

Rick Meraw, Group VP Quality/ R&D stated, “Building on the technology of 4-Wire Kelvin has given the opportunity to provide Inductance Testing.  This is primarily effective due to the use of 4-Wire Kelvin method to provide the accurate measurement.  Parasitic stray variables are filtered out using the 4-Wires (2 on each measurement probe) which allows for the native Inductive measurement to be captured.”

Rick went on to say, “4-Wire Kelvin Testing has been available for years, but to have the ability to perform both tests on a single machine using our FPX Software platform allows greater options at our Service Centers for our customers and partners to choose from.  It is a positive addition to our portfolio for Services and Equipment purchases alike.”

Gardien has constantly upgraded and added new technologies and most advanced features to its new and existing machines during its long journey in the field. Consistent R&D and the ability to adapt to drastic changes have made Gardien one of the most dynamic names in the PCB industry.

Contact your nearest Service Centre for further details or visit www.gardien.com

About Gardien 

Gardien is the world’s largest provider of independent testing and inspection solutions to the PCB industry. With a global footprint in 6 countries & 18 service centers across Asia, Europe and North America, Gardien partners with PCB manufacturers supplying into the automotive, aerospace, medical, defense, computers & telecommunications sectors. We cater to the testing and QA needs of the entire spectrum of fabricators from small family-owned PCB shops to large international corporations.

Share




Suggested Items

Test and Inspection: Competitive Advantage and Cost of Doing Business

12/08/2021 | Nolan Johnson, I-Connect007
In this interview, Charlie Capers of Zentech breaks down the changing requirements he’s seeing in test and inspection in the industry, and the growing importance of investing in testing for the future growth and success of your company. According to Capers, "When you collect statistics on defects, you will start to see a trend that says, for example, we’ve got a lot of shorts and opens, meaning that our solder paste process is not tight. If you’re collecting statistics and really studying them, you will see trends in your processes."

Test and Inspection: Far Beyond Opens and Shorts

12/07/2021 | I-Connect007 Editorial Team
Gardien Vice President Todd Kolmodin talks about test and inspection market drivers from his perspective as a test service provider. Andy Shaughnessy and Happy Holden go down the “microvia rabbit hole” with Todd, as well as explore how OEM design requirements are driving test and inspection functionality and processes. When board layer counts and feature densities force longer test times, the tradeoffs to profitability for manufacturers become time and accuracy. Minimizing time while maximizing accuracy calls for new methods, which Kolmodin explains.

Alex Stepinski: A Philosophical View

11/30/2021 | I-Connect007 Editorial Team
"My philosophy is to rely more on sensors throughout the process to measure things non-destructively, then build a model for how you’re going to perform, and just validate against the model," said Alex Stepinski. "It’s the next step slowly happening worldwide. For instance, we’ve had 2D AOI for many years. Sometimes, this is complemented with electrical tests. Now, you start to see more 3D AOI happening. You see them putting more sensors on the AOI equipment for direct measurement. Then, you also have the traditional signal integrity testing."



Copyright © 2022 I-Connect007. All rights reserved.