-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Chemcut’s Robotic Solution
May 24, 2022 | I-Connect007 Editorial TeamEstimated reading time: 3 minutes
The I-Connect007 Editorial Staff spoke with Chemcut’s Jerry Reitz, and Atlantic Microtool’s Bruce Siemering and Neil Robinson about recent robotic automation advances, a specific robotic solution from Automata, and the changing factors tipping toward robotic automation in the current market.
Nolan Johnson: While robotics in the PCB fab area have been on the cusp for quite some time, it seems they haven’t taken off. Chemcut has been working with Atlantic Microtool and Automata on a possible solution. What motivated you to partner on robotic handlers now?
Jerry Reitz: By no means is this a large, industrialized robot. We believe that it is a fit for most of our customer’s applications, from small shops with smaller budgets and limited space to large facilities looking for a plug and play solution for large volume production.
Andy Shaughnessy: Who’s the manufacturer?
Bruce Siemering: The robot arm is manufactured for Chemcut by a robotics company out of the United Kingdom. Atlantic Microtool, which is owned by me and Neil Robinson made the initial contact and introduction to Chemcut.
We wanted to solve this problem where somebody is running a conveyorized line, and they’re loading a metal panel or a circuit board every 30 seconds, and they’re just standing there, or they’re running around to the other side to unload. It’s a mundane job that would be a perfect fit for this robot.
As we were looking for a robot, we noticed the ones we found were a little more difficult to program because the software was intimidating. One of the attractive features of this robotic handler we offer is that the software works on top of Python, which is a common software that runs automation.
It’s very easy to use and it’s not intimidating. When we first sent a robot to Chemcut one of their engineers, Dan Dietz, had it up and running in an hour or two. You can pull it out of the box, follow the instructions, and program it pretty rapidly to pick something up and move it to a conveyor. There’s not a very complex tool path with it.
Neil Robinson: When we’ve done demonstrations in the field, we show up at a customer site and within 45 minutes, we are actively loading product onto any conveyorized line. Not only is the setup simple, but it’s very simple to operate. Anybody who works in a manufacturing facility could be taught to program this robot within a couple of hours, unlike other industrial robots that have equally sophisticated software that require certain expertise to program. As Bruce pointed out, the software used to program this robot is a very user-friendly shell that sits on top of Python. Through graphics on the screen, two buttons that reside on the robot, and a mouse, you can create pretty sophisticated programs to load and unload equipment. The robot also has several digital inputs and outputs for sending and receiving commands from other equipment and devices.
Johnson: Is the handler so specialized that it only works well in a board fab application, or can it be used for other purposes?
Robinson: This robot wasn’t originally designed for the chemical milling or PCB industries. Actually, most of the early applications were in laboratory automation. We’ve taken that robot and adapted it to chemical milling and the printed circuit board industries with the use of specialized suction grippers. The robot can also be equipped with other tooling to handle many different applications, but primarily we are focused on the conveyorized equipment that Chemcut offers.
Johnson: With such an easy setup and operation, are your customers buying into the idea?
Robinson: Yes, overall, there are 300 to 400 units in the field with the first chemical milling installation in the United Kingdom. That unit has been in operation for a couple of years and the robot is holding up very well to that chemical environment.
To read this entire conversation, which appeared in the May 2022 issue of PCB007 Magazine, click here.
Suggested Items
NCAB Promotes Arjan Sinoo to VP Global Sales
03/28/2024 | NCABArjan Sinoo, currently Managing Director of NCAB Group Benelux, has been promoted to the position of VP Global Sales and member of the Group Management of NCAB when he takes over the position from Howard Goff, who has recently been appointed VP and president North America.
ACDi Takes Milestone Delivery of the 23,000th Koh Young Machine
03/26/2024 | ACDiAccording to ACDi (American Computer Development, Inc.), “Flexible, reliable, and equipped to keep your project on schedule, is what you need as an electronics manufacturing services partner.”
Dave Brooks Celebrates 25 Years at IEC USA
03/26/2024 | IECPlease join IEC (International Electronic Components) in congratulating Dave Brooks on 25 years of service and camaraderie. As one of the original members of the IEC USA team, Dave is a valuable contributor to IEC's continued success.
Nano Dimension Announces Another Deep Learning AI Patent Granted to its DeepCube Technology
03/19/2024 | Nano DimensionNano Dimension Ltd., a leading supplier of Additively Manufactured Electronics (AME) and multi-dimensional polymer, metal & ceramic Additive Manufacturing (AM) 3D printing solutions, announced that a patent was granted for technology developed by its industrial artificial intelligence (AI) group, DeepCube, that enables better training and optimization of decentralized deep learning-based AI models.
IEC Congratulates Bruno Ferri for 25 Years of Service
03/19/2024 | IECPlease join IEC (International Electronic Components) in congratulating Bruno Ferri for 25 years of service and camaraderie. Bruno is an integral part of our team and has significantly contributed to our success.