ITEQ January to April Revenue Up 8.5% YoY


Reading time ( words)

Taiwan-based firm ITEQ Corp., a manufacturer of high-performance copper clad laminate (CCL) materials used for the fabrication of printed circuit boards (PCBs), has posted sales of NT$2.66 billion ($91 million at $1=NT$29.29) for April, down by almost 1% year-on-year and by 3.33% from the previous month.

For January to April, ITEQ posted total sales of NT$10.9 billion ($373.38 million), up by 8.45% compared with the same period last year.

Share




Suggested Items

Breaking Down the Current Materials Market

06/08/2022 | Nolan Johnson, I-Connect007
Nolan Johnson meets with Isola’s Ed Kelley at DesignCon and takes a tour of the dynamics in play in the materials market. As Isola prepares to roll out an extremely low-loss, halogen-free product, Kelley says the company continues to work on how to make the product reproducible and available to customers around the world.

Engineering RF Dielectric Material to Enable 5G/6G Antenna Devices

04/11/2022 | Chudy Roosevelt Nwachukwu, ITEQ Corporation
Accurate characterization of frequency-dependent inhomogeneous dielectric material properties is key to the optimal design of high performance and cost-effective PCB antennas. These antennas will be required to enable the plethora of devices forecasted for 5G/6G communication. Therefore IT-88GMW, an advanced resin system reinforced with tightly woven thin glass fibers has been formulated to improve the Q-factor of interconnects and passive components fabricated on PCB laminates.

Improved Thermal Interface Materials For Cooling High-Power Electronics

03/31/2022 | Jeff Brandman, Aismalibar North America
Heat has been a significant concern in electronics since the beginning of the electronics age when hot glowing vacuum tubes were first used to receive and transmit data bits. The transistor and integrated circuit effectively solved that basic problem, but increases in integration resulted in increased concentration of heat, exacerbated by relentless increases in operating frequency. While improvements in electronics technology have been able to mitigate many thermal issues at chip level thanks to improved semiconductor designs devised to operate at lower voltages (thus requiring less energy) the thermal management challenge continues to vex electronic product developers.



Copyright © 2022 I-Connect007. All rights reserved.