The Practical Side of Using EM Solvers


Reading time ( words)

Electromagnetic (EM) solvers based on Maxwell’s equations have proven invaluable in the advancement of digital electronics and wireline communications. Plain and simple, electrical engineers need to know what a circuit or electrical interconnect will do when excited by a dynamic or varying signal. In the signal integrity world, an interconnect that passes a DC connectivity check can completely fail at higher frequencies. In the power integrity world, a power rail that measures the correct DC voltage could easily go into oscillation when a dynamic load is applied. Learning the basic skills to fire up an EM simulator, obtain qualitative answers in minutes, and higher fidelity answers in a few days, can be the difference between sleepless nights of product failures vs. robust designs with wide design margins.

In the beginning and even today, EM simulators are constantly in search of the right balance between accuracy and speed to “mesh” a three-dimensional structure and acquire the right answer. In the search for the ultimate solution to Maxwell’s equations, whether it is in the frequency domain for finite element methods (FEM) or in the time domain for finite difference time domain (FDTD), the user interface often suffers. Setting up ports, boundary conditions, and mesh topology might give the guru user additional flexibility. For most of us, we need automation to reduce the repetitive tasks.

barnes_fig1_0822.jpg

Figure 1: 3D EM simulators like PathWave ADS SIPro and PIPro make it easy to select nets and auto assign ports for fast EM setup and simulation. EM current density results on the right for a DDR4 DIMM board show how the power delivery at 10 kHz comes from the J1 edge connector, but at the higher 10 MHz frequency the power is being delivered by the on-board capacitors.

The good news is the processing speed of modern computers and low-cost memory has made it much easier to maintain significant accuracy while increasing speeds. This has enabled increased investment in optimizing user interfaces for specific applications, like simulating multi-layer laminate PCB designs. The improved user interfaces like Keysight’s PathWave ADS SIPro and PIPro rely on robust importing of EDA PCB CAD data, which include stackup, nets, and components for easy selection of nets and components for simulation. Ports can be automatically assigned, and default meshing and boundary conditions enable users to be up and running with an EM simulation in a matter of minutes.

However, simulators are notorious for “garbage in equals garbage out.” Here are a few tricks of the trade to ensure a proper setup.

To read this entire article, which appeared in the July 2022 issue of Design007 Magazine, click here.

Share




Suggested Items

Cadence Provides ‘Clarity’ in Design Tool

08/11/2022 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Brad Griffin, product marketing director for Cadence Design Systems, about Cadence’s Matrix solver technology. They discuss its use as a multi-disciplinary field solver as well as Cadence’s focus on thermal analysis and utilizing the power of the cloud.

HyperLynx: There’s an App for That

08/05/2022 | I-Connect007 Editorial Team
I recently spoke with Todd Westerhoff, product marketing manager for signal integrity software tools at Siemens. We discussed a new capability called HyperLynx Apps that offers a new take on traditional signal and power integrity analysis, and how that fits in with the Siemens plan to put SI and PI tools into the hands of more designers early in the design cycle.

Webinar Review: Thermal Integrity of High-Performance PCB Design

08/01/2022 | Andy Shaughnessy, Design007 Magazine
Electrical and mechanical engineers may be working on the same product development teams, but they speak different languages, and they have completely different objectives. As a result, these folks almost never use the same software tools. But Cadence’s new Celsius Thermal Solver is an exception to the rule. In a new CadenceTECHTALK webinar, “How Static and Dynamic IR Drop Analysis Can Help PCB Designs and Challenges,” product manager Melika Roshandell and SerDes SI/PI engineer Karthik Mahesh Rao explain how the EE and ME can both use the Celsius Thermal Solver to achieve their disparate objectives.



Copyright © 2022 I-Connect007. All rights reserved.