American Standard Circuits to Exhibit at The Battery Show


Reading time ( words)

Anaya_Vardya-300.jpgAnaya Vardya, president, and CEO of American Standard Circuits, announces that his company will the exhibiting at this year’s The Battery Show at the Suburban Collection Showplace in Novi, Michigan, Sept. 13–15.

Regarding the show, Mr. Vardya commented, “The technology of power solutions is the technology of the future, and our job is to always stay ahead of our customers when it comes to their specific PCB needs. The Battery Show is an important place for us to be to meet and talk to engineers and industry leaders about their innovative products and power solutions of the future.”

ASC looks forward to meeting with attendees on the show floor in Booth 3408.

Visit I-007eBooks to download your copies of American Standard Circuits’ micro eBooks today:

The Printed Circuit Designer’s Guide to… Fundamentals of RF/ Microwave PCBs
The Printed Circuit Designer’s Guide to... Flex and Rigid-Flex Fundamentals
The Printed Circuit Designer’s Guide to…Thermal Management: A Fabricators Perspective

About American Standard Circuits
American Standard Circuits (ASC) prides itself on being a total solutions provider, manufacturing quality rigid, metal-backed, RF/microwave, flex, and rigid-flex PCBs for the medical, automotive, industrial, defense, and aerospace markets in volumes from test and prototypes to large production orders. ASC has the expertise to provide a wide variety of technologies in a time-critical environment. Their qualifications include AS9100 Rev D, ISO 9001:2015, MIL-PRF 31032, MIL-PRF-55110, MIL-PRF-50884 certification and ITAR registration. In addition to manufacturing in the USA, ASC can transition and manage your PCB requirements to lower cost regions via its qualified supply chain of offshore partners. ASC also holds many key patents for metal bonding processes. For more information about American Standard Circuits' services or to ask one of their technology experts a question go to www.asc-i.com.

Share




Suggested Items

Michael Carano: A Focus on Process Control, Part 2

09/28/2022 | I-Connect007 Editorial Team
In this second half of our conversation, Michael Carano discusses some of the metrics that fabricators need to consider before investing in new processes, especially process control technologies, and some of the challenges board shops face updating brownfield sites.

A Focus on Process Control, Part 1

09/27/2022 | I-Connect007 Editorial Team
Michael Carano is a noted subject matter expert with respect to process control, electroplating and metallization technology, surface finishing, and reliability. So, it was only natural that we sat down to talk about mechanizing an existing facility given today’s fickle environment. Will any of the CHIPS funding trickle down to bare board fabrication? What process can be adjusted on the factory floor? The focus needs to be more than just on manufacturing and getting work out the door, he says, but also process control.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

08/05/2022 | Nolan Johnson, I-Connect007
The Top 5 list this week contains industry analysis from IPC’s Shawn DuBravac, news on the passage of the U.S. “CHIPS Plus” bill, new materials from Ventec, news about a fab for sale, and a chemistry company completing their acquisition, plus a brand new book in the I-Connect007 eBooks series.



Copyright © 2022 I-Connect007. All rights reserved.