-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Passing the Test With SMTA’s Rob Boguski
September 14, 2022 | Andy Shaughnessy, I-Connect007Estimated reading time: 9 minutes
AUDIO TRANSCRIPT:
I recently spoke with Rob Boguski, president of Fremont, California-based Datest and an SMTA vice president and board member. Rob explained why today’s test customers are asking for more information than the traditional pass/fail, offers a preview of SMTA International, and gives an update on SMTA’s planning strategy for the next five years.
Andy Shaughnessy: I’m here this afternoon with Rob Boguski, president of Datest, and a long-term member and leader at SMTA. How are things going, Rob?
Rob Boguski: It’s a busy time, Andy. In spite of the pandemic, business has been, well, busy. There are a lot of new opportunities, a lot of new industries, which for us is wonderful. Datest has two businesses. We’re test engineers and failure analysis engineers. The latter is an outgrowth of the former.
We originally started in the testing business when Datest was founded in 1984, doing in-circuit testing then later, things like flying probe and boundary scan in AXI and other techniques. Along the way, many of our customers started saying, “You can test my boards. They pass, they fail. Now, tell me why they failed. Give me an analysis of the failures.” We started investing in various techniques, methodologies, and capital equipment to enable us to come to those answers, primarily by means of imaging technology like X-ray, 3D, and CT scanning to get to the root cause of failures, mostly of solder joints.
As time has gone by, those two businesses have grown, but the failure analysis business in particular has grown exponentially over the last five years. Not only for electronic products, but also for many other things, because we have a very large CT scanning system that’s unique in the industry. Engineers get wind of it and bring us things like castings, metal parts, plastics, tubing for medical applications, and all manner of things that need to be non-destructively analyzed to get to the base of what goes wrong.
A good example would be an avionics package for space flight, where you’ve got several boards that are joined together and then enclosed in a larger box. Rather than tearing the box apart, we’ll CT scan it to find out why there’s an open in a particular location, and maybe we’ll locate a cracked pin on a connector or a head and pillow defect on a solder joint. Maybe it’s a combination of things, but you can do that a lot quicker than tearing it apart, and obviously it’s less destructive. If you can identify the problem quickly, then oftentimes the customer can perform the necessary rework and restore it to service.
From where we sit, automation is at the end of the food chain, so it speeds up the process, which means it increases the volume of defects, which, cynically and self-servingly, is pretty good for business. Because you multiply the number of defects, you multiply the severity of the defects. It creates opportunities for us to help people. Our customer base has grown by leaps and bounds over the last three years because of that. Industry 4.0 is very good for us.
Shaughnessy: We didn’t really hear that much about failure analysis until about five years ago. Now it seems like it’s taken off.
Boguski: It is because reliability is becoming a more important term. One of the dirty little secrets of our industry has been that, if it passes test, however marginal the solder joints may be, it is a good board at the manufacturing level in many cases. It fails to take note of the marginal conditions. What happens is that product then gets shipped or goes into a larger product, which gets shipped. It goes to the field, works for a while, then in something like nine months or two years, it stops working. If you’re dealing with a piece of equipment on an oil rig in the Gulf of Mexico, that’s a bit of a problem. If it’s avionics in a spacecraft, a satellite, or an aircraft, you don’t want that to happen when you’re airborne.
Reliability is an issue and discovering what impacts reliability feeds back to the manufacturing process to make more robust solder joints. We contribute to our failure analysis activities hard data to show process engineers what it is that failed, what they can do to take corrective action, and how they can make their assembly lines more robust.
Shaughnessy: This feeds directly into what you’re involved with at SMTA as well.
Boguski: That’s my night job. My day job is running Datest. My off-hours job is being a member of the board of SMTA. I’m finishing the third year of my term. I’m currently vice president of membership, so in that regard, I chair two committees: the Membership Committee and the Chapter Leadership Committee. Membership oversees everything that has to do with attracting new members, onboarding, and then retaining them, hopefully by showing them the full range of benefits available that SMTA offers. Chapter Leadership looks at and works closely with each and every one of our 40-some individual chapters around the world and helps them as a resource. If they’re having problems attracting and retaining officers, looking for speakers, or maybe somewhat dormant and want to revive their chapter, we help them out by encouraging them, bringing speakers and attending their events, providing constructive feedback, and so forth.
I shepherd the people who do that sort of thing and hopefully promote our organization in view of our goals, and in light of all of the crazy developments we’ve all had to experience the last couple of years with the pandemic, the economy, and so forth. It’s been a challenging time. I took office in 2019, about five months before the pandemic hit, and then in March 2020, everything shut down. We went into crisis mode on the SMTA board, where for a time we were meeting every single week to make decisions. Do we keep holding expos? Do we cut back completely? Do we go into hunker down? When they teach you how to be a board member, there’s nothing in the manual that teaches that.
We were working very closely as a group, observing data, combining our knowledge of the news and our own personal experience in our respective businesses, trying to figure out what was best with SMTA. I’m happy to say, we’ve come through the experience a stronger organization, and our membership is up.
Shaughnessy: I attended SMTA Dallas and Atlanta this year, and I saw more young people on both of those trips than I remember seeing at previous shows. Do you see that?
Boguski: Yes, and that’s intentional. We have several initiatives to encourage and attract younger engineers and technical people into both the profession and SMTA that has connections that will help their careers. We are revamping our career center, meeting or matching people looking for a job with those offering jobs. There are a lot of job openings right now, as we know.
We have events that are tailored to younger engineers, what we call SYPs—students and young professionals. These are people in technical and engineering programs who are about to graduate and younger engineers who are in the early stages of their careers. We’re laser focused on that because it’s the lifeblood of our organization. A lot of the veteran members are retiring. There’s turnover and we’ve got to encourage and attract new members. To do that, we must be relevant to what their concerns are and to what’s going on in the industry.
Shaughnessy: I know a lot of people are excited about SMTAI this year as it’s in a new venue.
Boguski: New place, and a new venue in Minneapolis. It’s not the warmest place in November, but it’s a nice convention center. We’re at a good point where people want to get out. They’ve been cooped up for two years, and they’re looking for an excuse to get out and see their friends and colleagues, share the knowledge, start mingling again, meet face-to-face.
We’ve all done Zoom. We do that every day. That’s probably here to stay, whether we like it or not, but there is some merit in face-to-face meetings. We’re not doing a hybrid event this year. It will all be face-to-face. We’ll have the expo, and the technical conference all in person. We hope to get 100 to 150 exhibitors for the expo. It looks like we have about 120 to 130 technical papers submitted for the technical conference, so that’s very encouraging as well.
Shaughnessy: I’m looking forward to it. I’ve never been to Minneapolis.
Boguski: It’s a nice town. It’s a small town for a big town. People are friendly and hospitable. The convention center is nice. It’s easy to get to, with lots of airline connections. You might need a jacket in November. It could be a little chilly, but not a problem there.
Shaughnessy: Are there any other updates about SMTA, or anything else that you’d like to mention?
Boguski: Yes. SMTA has gone through a strategic planning process in the past year. We hired a consultant who specializes in nonprofit organizations who put together a plan, which the board is in the process of evaluating and hopefully adopting. This will be our guidepost for the next five years about the things we do and how we do them, the framework for how we execute as an organization.
It’s built around four strategic pillars. Basically, the themes are strong industry workforce, member connections and engagement, organizational excellence, and advancing technical knowledge. Each theme has several subsidiary points as to our strategy for accomplishing those themes. That will be the framework we work in as we expand and further diversify the benefits for membership of SMTA.
You’ll see a lot of new offerings in the form of activities and initiatives. In the past year, we simplified our membership structure, which has been a big hit for everybody. It’s a lot easier to understand. We have three categories of corporate membership—bronze, silver, and gold—that are a big hit. We’re revamping our training programs as part of advancing technical knowledge. You will hear about a lot of new offerings in the next 12 months.
I already mentioned the career center and a lot more in the way of follow up and interaction with our chapters and our members to make sure they’re taking full advantage of their membership and getting their money’s worth. It’s a lot more of sitting down and listening to our membership, not telling them how to do things, but listening to what they want, and then putting proactive programs together to help them achieve what they want in their careers, with their chapters, and in their companies. We’ve got a lot going on.
Shaughnessy: Very good. Thanks for speaking with me, Rob.
Boguski: Thank you, Andy.
Suggested Items
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.