Victory Giant Technology to Showcase Carbon Footprint Calculator at PCB West 2022


Reading time ( words)

Victory Giant Technology, the fastest growing publicly traded PCB fabricator in China today announced they will showcase a new software tool for calculating total carbon emissions for any PCB design.

VGT’s Executive VP & CTO George Dudnikov commented, “VGT has been addressing the reduction of Green House Gases (GHG)  and improved Sustainability of the PCB process since 2011.  Through the continued focus on process automation and electricity/water conservation efforts, the company has saved 106,624,100 Kwh of electricity and reduced carbon emissions by 37,507 tons of CO2  through Jan 2021. Our data collection and process monitoring methods have been certified to GB/T 23331-2020, ISO 50001-2018, and RB/T-101-2013 standards.” The company has been recognized by the Chinese Government as a leading “ Green Manufacturer”.

We were asked by several large OEM customers if we could develop a method to quantify the environmental impact of specific PCB part numbers so that they could use the information to optimize and reduce the carbon emissions of their PCBs in support of their corporate Sustainability Initiatives. We had the data for key PCB processes but needed a way to add material ( laminate, copper foil, and prepreg ) contributions and effects of special processes like sequential lamination, VIPPO, HDI, etc. Tools available on the market were too generic and could not support the process complexity of an advanced PCB  design. As we had experience with several PCB stackup tools, we saw a natural opportunity for a joint development project to develop a CFP Calculator.”

Visitors to the Victory Giant Technology Booth 303 will be able to obtain the following information:

  • Meet with representatives from VGT to review Sustainability accomplishments and get a demo of the CFP Calculator tool.
  • Arrange for a free Carbon Footprint analysis of any design based on Gerber data.
  • Review VGT’s other capabilities for advanced HDI and High-Speed PCBs

Share




Suggested Items

ICAPE: Staying on Top During ‘Interesting’ Times

12/05/2022 | Nolan Johnson, PCB007 Magazine
Recently, we met with Nathan Martin, group purchasing director; Jean-Christophe Miralles, supply chain director for Europe and U.S., and Lea Maurel, Americas marketing manager. This wide-ranging conversation dug into market drivers, supply chain challenges and how ICAPE creates consistency on its manufacturing floor. Complementing the supply chain control is ICAPE’s engineering experise, which it uses to increase customer yields and quality. Corporate sustainability is a key strategic initiative for ICAPE, and it was enlightening to learn just how holistic ICAPE’s approach to sustainability is.

Optimize Your Etcher for Best Image Quality

11/03/2022 | Christopher Bonsell, Chemcut
When it comes to obtaining high-quality images, many different factors come into play. Typically, most of these factors come down to your imaging equipment and cleanroom; however, there are factors involved in the etching process that can affect the quality of your image. Here are five steps to ensure your etching process is optimized for the best image quality.

Millennium Circuits on The Move

10/31/2022 | Andy Shaughnessy, Design007 Magazine
I recently met with Daniel Thau, CEO of Millennium Circuits Limited, at PCB West. This Pennsylvania-based PCB distributor has been on an expansion path lately, so I asked Daniel to introduce us to MCL and explain where the company is headed. As Daniel says, it’s all about impacting the world in a positive way.



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.