-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
Economic Headwinds
In this issue, the biggest names in PCB manufacturing share their economic outlook for the upcoming year and beyond. As you will see, they were all bullish on our industry, but there was some apprehension as well. No one wants to get burned by another the supply chain disruption.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Ventec: Contextualizing the CHIPS Act
January 5, 2023 | Nolan Johnson, I-Connect007Estimated reading time: 6 minutes
Nolan Johnson hears from Alun Morgan, Technology Ambassador at Ventec, and Mark Goodwin, Ventec’s COO, about the benefits and risks posed by new PCB-oriented legislation in the U.S. and Europe. Faced with a rapidly consolidating industry, especially in the face of mounting pressure from the Russia-fueled energy crisis, government intervention is a welcome prospect—as long as legislators are committed to addressing the full scope of the issue, including the supply chain’s migration to Asia. Ventec is hopeful that, having been called on to educate government officials on the challenges facing the industry, they will help spur future legislative changes that will protect and grow the industry’s interests.
Nolan Johnson: In the U.S., the CHIPS Act, is a recently introduced funding act that intends to help bring the PCB business back to the States. Of course, there is similar legislation underway in the EU. What are your thoughts on this activity? Is this legislation necessary?
Alun Morgan: Where are you going to put the chips, is the question. I mean, if you look at the silicon industry, most of the value in their business is IP. Raw material is off the beach. I’m going to say there’s no raw material supply chain issue; the issue is the technology of the IP for the silicon guys. Our issue is different because our supply chain and our material content in PCB laminates is high relative to silicon. Content of the silicon is tiny compared to the IP value, unlike in our case.
Our supply chain for European and the North American business is based in Asia. There’s a bit here, there’s a bit there, and you might bring a bit more back. I’ve heard about all these stories about how business is going to shift back to the West, but the majority of the supply chain is still based in Asia. You’re going to have to bring that supply chain over for this to work. I mean, it’s a great thing to do— legislating the policies and building the infrastructure necessary to make silicon in the U.S. and in Europe. But then you’re still going to need boards to put it on, and if we do nothing for the board shops, then we’ve lost the supply chain completely.
Why not just do it all in Asia? Why even automate the silicon over? What’s the point? All we do is bring the board information, anyway, sticking the last little bits on. What difference does that make? Silicon plants, okay, strategically, it’s important to have silicon in your country. I realize that. That doesn’t occur to many people beyond the design guys. This is also not necessarily done on shore, but the PCB industry does employ people. I think government needs to understand that it’s no good focusing on just one piece of this process without understanding the whole chain, and they clearly don’t understand that right now.
Our job is going to be to educate them about the PCB side of this, which I hope we’ll be able to do. I know they’re doing that in the U.S. as well. The CHIPS Act is one part, yes, but we need to go beyond that to the next stage as well. When it comes to the supply chain, that’s going to be very hard to argue, because you’re talking about big companies making huge investments. On the PCB side, what we’re saying is: We have an industry here and in North America; please help us and don’t let this industry shrink any more than it already has.
If you do nothing, we will suffer, and especially in Europe because of the energy crisis—and that’s one point I’m working on right now. The Ukraine war has hit us very hard, which again, none of us could have predicted. Well, perhaps some folks did, but I certainly didn’t. None of us really expected this. The war has had a huge and devastating impact on the manufacturing of PCBs in Europe.
We’ve mostly recovered from the pandemic by now. We went down to €1.5 billion of domestic production in Europe. We’re back to around €1.9 billion or so now, which is where it’s been for the last 10 to 15 years or so; I’d say we’re pretty much on an even keel again as far as that goes. In that time, though, we’ve lost a number of producers. That number is still falling as consolidations continue. The volume is there, but the danger now is that we take another step down because EU companies can neither survive nor compete with Europe’s high energy costs compared to U.S. and Asian producers.
I don’t think government should solve all our problems, by the way—I think that’s too naïve a view. But they must understand this, and they must understand that if they’re going to do the one thing, they’ve got to think about next steps as well if they want to make sure they’re secure in the position they’ve created. I think in the U.S. this is all a bit easier, mainly because you have cheap energy in the U.S., and you still do for all the good things you’ve done over the years.
In Europe, unfortunately, we’ve made some mistakes, and perhaps the biggest one was relying a lot on Russia for our energy and gas. We couldn’t really have known this would end up being a mistake; it’s worked for decades now without any problems, but the impact of that shift has been surprising. The Germans moved away from nuclear power and became more reliant on Russia.
Mark Goodwin: I don’t see material suppliers or even laminate plants opening in the U.S. or Europe at least not full lamination plants with treaters and resin reacting and mixing. There may be investment in pressing capabilities, sure, but I don’t see the rest of the process coming back. What I do see is that there will be diversification of manufacturing footprints in Asia, and Ventec and the guys like us; we put our factories in Taiwan and China, and I think any new investments will be spread out over a wider footprint in Southeast Asia, with a focus on Thailand, Malaysia and Vietnam.
Morgan: Perhaps a larger higher-mix footprint as well. Countries develop by going from agriculture to manufacturing to services—that’s the natural progression over time. We’ve seen that, but you mustn’t give up on your current stage when transitioning to the next one; you mustn’t give up all your agriculture when you move to manufacturing. Similarly, you mustn’t give up all your manufacturing when you go to services. The question is, how do we strike that balance? I’m nervous that we may tip the balance on the manufacturing side and lose even our most recent gains. I know we’re very sensitive about the military in both the U.S. and in Europe, and for good reason. When it comes to the military sector, you want to keep that close to home, but in actuality, the military supply chain for electronics—that whole supply chain, and all its associated materials—that’s all in Asia now. You’ve still got a chunk of the IP stuff made in the U.S. and Europe, but we’ve already lost the first bit. What we’re saying is, don’t lose the next bit as well, even though that’s looking very likely right now.
Johnson: Thanks, gentlemen.
Morgan: Thank you, Nolan.
Suggested Items
Enabling a New Paradigm for Flexible, Point of Need Design and Manufacturing
03/18/2024 | DARPAThe Department of Defense (DOD) needs the flexibility to manufacture critical structures at the time and point of need using locally available materials.
Join The Murray Percival Co. at IPC APEX EXPO 2024
03/15/2024 | Murray Percival CompanyThe Murray Percival Company, the award-winning leading supplier to the Midwest’s electronics industry, is excited to announce their participation in the upcoming IPC APEX EXPO, scheduled for April 9-11 at the Anaheim Convention Center in Anaheim, CA.
ROCKA Solutions Expands into Brazil
03/15/2024 | ROCKA SolutionsROCKA Solutions is thrilled to announce its expansion into Brazil. With a commitment to serving the growing needs of the Brazilian electronics manufacturing market, ROCKA has established new distribution and manufacturing services in the region.
Much Ado About Factory of the Future
03/13/2024 | Chris Jorgensen, IPCFor attendees looking for guidance on modernizing their manufacturing, IPC APEX EXPO 2024 will provide plenty of opportunities to learn about the latest innovations and how to begin applying them in your operations today. When walking the show floor, look for the IPC-CFX flags at vendor booths. These are equipment vendors who know the importance of IPC-CFX for their customers and the industry, and have demonstrated proficiency in IPC-CFX implementations.
DARPA Explores Additive Manufacturing’s Revolutionary Potential for Futuristic Microsystems
03/12/2024 | DARPADARPA played a seminal role in establishing materials science as a discipline. One of the latest disruptive efforts in new materials and applications, the Additive Manufacturing of Microelectronic systEms (AMME) program, seeks to launch microsystems manufacturing far beyond today’s state of the art.