Oxide Alternative Processes


Reading time ( words)

Introduction

It is all about optimizing the performance of the oxide alternative chemistry. This includes close monitoring of the main reactive ingredients of the process chemistry. And one of the first issues that the industry had to address, whether one is using reduced oxide chemistry or oxide alternatives, is pink ring. While the industry has enjoyed moderate success at minimizing the dreaded pink ring defect with reduced oxides, the desire has long been to simplify the bonding treatment process. Secondly, improving bond strength on high-performance and advanced resin materials is critical to the successful implementation of any interlayer treatment process. While the latter attribute is well documented, the ability of the oxide alternative bonding system to resist pink ring must be established. In all instances, where multilayer PWB test coupons (some fabricated with reduced oxide, others with alternative bonding treatment) were subjected a severe acid test, no pink ring was detected. The coupons were immersed in an aqueous solution of 17% hydrochloric acid for 15 minutes. After removal, the coupons were horizontally ground down to remove the outerlayer pad. Coupons were then inspected under 30x microscope. No pink ring was detected on the coupons fabricated with the organo-metallic (oxide alternative) bonding process. However, the reduced oxide bonding process showed pink ring.

It is important to recognize that the existence of pink ring does not suggest that the PCBs are rejectable. In fact, pink ring is defined in the IPC-600H (acceptability of printed circuit boards) as a process indicator. No evidence exists that pink ring affects functionality. In fact, the presence of pink ring concerns a number of manufacturing processes. The focus of concern should be the quality of the lamination bond, the laminate materials, drilling, desmear metallization processes. As an example, etchback prior to metallization can open up a wedge between the B-stage material and the oxide (or oxide alternative). The wedge defect thus can act as a via allowing acid chemicals to seep in, removing some of the treated copper foil coating leading to the appearance of pink ring.

Read the full column here.


Editor's Note: This column originally appeared in the July 2014 issue of The PCB Magazine.

Share




Suggested Items

Don't Blink: The IPC APEX EXPO Time-lapse

01/31/2023 | Nolan Johnson, I-Connect007
It’s a tradition here at I-Connect007 to set up a time-lapse for IPC APEX EXPO. There’s something satisfying, mesmerizing even, to watch the show floor build out and see the moment when the doors open and visitors fill the exhibit hall. Based on what others have said over the years, I know I’m not the only one whose favorite part is when the carpet gets rolled out and the whole character of the exhibition changes. This time lapse starts on the Saturday prior and continues through the Thursday tear-down phase.

IPC APEX EXPO Wrap-up

01/30/2023 | Andy Shaughnessy, Design007 Magazine
IPC APEX EXPO 2023 is over, and I think it was successful show no matter how you slice it. There was barely a break in traffic on the show floor on Tuesday and Wednesday, and even on Thursday I saw people sprinting to close one more deal. Some committee meetings had nearly 200 participants; the meetings I sat in on were anything but boring.

NIST Resources for CHIPS Act Participants

01/27/2023 | Nolan Johnson, I-Connect007
At the recent IPC Advanced Packaging Symposium, Dr. Frank W. Gayle, deputy director of the Advanced Manufacturing National Program Office, an interagency team with core staff hosted at the U.S. National Institute of Standards and Technology (NIST), gave a presentation on the work NIST has recently undertaken in support of both the semiconductor and R&D sectors, and the CHIPS and Science Act.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.