Lead-free Reflow for High-layer-count PCBs


Reading time ( words)

This article is an update of the Holden-Carano article originally published in the February 2013 issue of The PCB Magazine.

Abstract

One of the most difficult printed circuit boards to adapt to Pb-free assembly processes is the high-layer count multilayer. Often, these multilayers have through-hole and hand-soldered components, and requirements for two or more rework cycles. The higher reflow temperatures and slower wetting of lead-free solders place an enormous strain on the laminate and copper-plated hole barrel. In many cases, the boards cannot be assembled reliably even with newer, higher thermal performance FR-4s. 

One solution to this problem is to redesign the multilayer using current design rules and newer innovative fabrication technologies. This article will review four of these new and enabling technologies:

  • Laser-drilled microvias;                                                        
  • Routing BGA using channels;
  • Contribution of new SMT connectors; and                               
  • Layer assignment changes (architectures).


Microvias offer the most significant opportunity to reduce not only the layers and thicknesses of multilayers, but also their cost while improving their electrical performance and density. Several examples will illustrate these new opportunities. Since blind vias are surface phenomena, to get the maximum benefit from them, layer assignment for signal, ground and power need to be reviewed and alternative constructions considered. These blind vias, by reducing the number of through-holes, contribute to increase routing density that allows the lower layer usage. Finally, by replacing through-hole connectors with surface mount connectors, higher connector density and improved electrical performance can be realized.

The resulting new multilayers are not only thinner, cheaper, and easier to design, but are less costly and suitable for lead-free assembly.

Read the full article here.


Editor's Note: This article originally appeared in the April 2014 issue of The PCB Magazine.

Share

Print


Suggested Items

Mentor’s User2User Conference Focuses on Semiconductor Development

11/25/2020 | Happy Holden, I-Connect007
Mentor conducted its annual User2User Conference virtually this year on November 10. In a departure from past U2U conferences, this event was focused primarily on developing semiconductor advances. Happy Holden reports on all the details.

Institute of Circuit Technology Technical Webinar

11/25/2020 | Pete Starkey, I-Connect007
With its regular program of physical seminars and symposia on hold, the Institute of Circuit Technology went virtual and presented a webinar of three technical papers, organized by Technical Director Bill Wilkie and introduced by IPC Chair Emma Hudson. Pete Starkey brings you all the details.

Just Ask Joe Fjelstad: The Exclusive Compilation

11/19/2020 | I-Connect007 Editorial Team
We asked for you to send in your questions for Joe Fjelstad, and you took us up on it! We know you all enjoyed reading these questions and answers, so we’ve compiled all of them into one article for easy reference. We hope you enjoy having another bite at the apple. And if you’d like to hear more from Joe, view his column series “Flexible Thinking.”



Copyright © 2020 I-Connect007. All rights reserved.