Seven Tips for Choosing the Right Test Service


Reading time ( words)

Do you need to go outside your company for your testing service? Maybe you have temporary capacity issues, or maybe your own equipment is down, or maybe you just want to make sure you have an established back-up plan that will be there when you need it? Whatever the reason, it is very important to choose the right outside testing service, because ultimately, you are not just choosing an objective service provider; you are choosing a partner. And not just any partner, but one that represents your product and company in the best possible light.

Therefore, it is important to carefully and diligently select the service bureau that is going to best meet all of your needs. To help you do just that, here are seven things to consider:

  1. How does the place look? Does it look professional, well managed, clean and organized? Does the equipment appear to be in good working order? Does the work look like it is organized? Are the panels properly stacked? How do they handle issues? This is the time to pay close attention to detail. I even check out the bathrooms to make sure they are clean; a quality auditor once told me that this is the first place that he looks when going into any facility to do an audit. He told me that nothing reflects the care and concern of an organization better than the way they keep their restrooms. These things should give you a pretty good preview of what the service bureau is really like.
  2. Take a close look at their equipment. Is it modern and up-to-date? If not all new, is it well maintained? Has the equipment been calibrated recently? Do they perform preventive maintenance on their equipment? There is nothing worse than going to an outside service because your equipment is broken down, only to have their equipment break down. I mean, what’s the point of a back-up, after all? Do they have traceability from the panels they have tested to the equipment it was tested on? This is critical!

Read the full column here.


Editor's Note: This column originally appeared in the March 2014 issue of The PCB Magazine.

Share




Suggested Items

Surveying the Fab Landscape: Where to Find ROI

06/01/2022 | I-Connect007 Editorial Team
Torsten Reckert and the team at all4-PCB have a uniquely broad view of what’s happening in the industry. When we asked Reckert about the hottest areas for return on investment, his answers were insightful and sometimes surprising. Readers will note that this conversation includes multiple references to Alex Stepinski and his approach to developing paradigm-shifting processes at GreenSource Fabrication LLC. Reckert worked closely with Stepinski during his time at GreenSource, and just as Reckert is an expert on the current market, Stepiniski is a thought leader on how to optimize processes, making his mention in a return-on-investment conversation particularly valuable.

Technica Heats Up ROI Discussion

05/17/2022 | I-Connect007 Editorial Team
The I-Connect007 Editorial Team speaks with Technica’s Frank Medina, Ed Carrigan, and Jason Perry about trending hotspots that provide the PCB fabricator a high return on investment (ROI). A theme that carries throughout the conversation is that traditional methods for calculating ROI are being replaced by models that include more qualitative factors.

PCB Technologies’ InPack to Focus on Miniaturization, Packaging

05/16/2022 | Andy Shaughnessy, Design007 Magazine
I recently spoke with PCB Technologies’ Jeff De Serrano, Yaniv Maydar, and Alon Menache about their new venture, InPack. They explain their plans to focus on advanced packaging, miniaturization, and other high-end technology, with much faster time to market, and they offer a view of the global market as well.



Copyright © 2022 I-Connect007. All rights reserved.