-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
Article Highlights
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
The Pros and Cons of PCB Surface Finishes
February 18, 2014 |Estimated reading time: 1 minute
Anyone involved in the PCB industry understands that PCBs have copper finishes on their surface and, if left unprotected, the copper will oxidize and deteriorate, making the circuit board unusable. The surface finish forms a critical interface between the component and the PCB. The finish has two essential functions: To protect the exposed copper circuitry and to provide a solderable surface when assembling (soldering) the components to the PCB.
Hot air solder leveling (HASL) was once the tried and true method of deliver consistent assembly results. However, ever-increasing circuit complexity and component density has stretched the capabilities of even horizontal solder levelling systems to their limits.
As component pitches became finer and the need for a thin coating became more critical, HASL represented a process limitation for PCB manufacturers. As an alternative to HASL, alternative coatings have been around for several years now, both electrolytic and immersion processes.
Here are some of the more common surface finishes used in PCB manufacturing, along with key advantages and disadvantages for each.
HASL/Lead-free HASL
HASL is the predominant surface finish used in the PCB industry. The process consists of immersing circuit boards in a molten pot of a tin/lead alloy and then removing the excess solder by using 'air knives' that blow hot air across the surface of the board.
One of the unintended benefits of the HASL process is that it exposes the PCB to temperatures up to 265°C, which will identify any potential delamination issues well before any expensive components are attached to the board.Read the full article here.Editor's Note: This article originally appeared in the January 2014 issue of The PCB Magazine.