PNC Acquires Pluritec Driller/Routers


Reading time ( words)

PNC Inc. recently acquired four Pluritec Multi-Station units, two Driller/Routers and two Drillers. These machines will complement our existing drilling and routing Departments with precision drilling/routing capabilities. The multi-station machines are powered by linear motors which increase speed, accuracy and productivity. The machines are also programmable with bit hit counting and broken drill notification.

The two Driller/ Routers are equipped with 80K spindles making them compatible for either Drilling or routing applications. These two units are both capable of controlled depth Drilling and Routing as well.  The other 2 drilling machines have 125 K and 180 K spindles geared toward drilling only.  These two units are also capable of controlled depth drilling.  All four Multi-stations are user friendly programmable, and can be programmed to Drill/Rout up to 18 different jobs consecutively, without interruption.  The machines can also be programmed for bit hit counting and broken drill detection and notification. 

pluritec.jpg 

PNC Vice President Calvin Switzer states: “The controlled depth Drillers will help immensely in our Blind via process, and the controlled depth routing capability will allow us to add step downs on boards that require it.  Also, when routing one panel prototypes on our current routers, we cannot utilize all the spindles at the same time, whereas with a single spindle unit, we can.”

PNC Inc. is a New Jersey based printed circuit board manufacturer since 1968. PNC is the leading producer of PCBs for Microwave, Aerospace, Defense, and Satellite industries. PNC offers a range of products including rigid, flex, and rigi-flex PCBs comprised of various base materials. PNC’ s current certifications are ISO 9001:2008, MBE/WBE Certified, Small Business, ITAR Registered, SDB-Minority Owned, UL for High Tg, MIL-PRF-31032, and MIL-PRF-55110. For more information, please visit http://www.pnconline.com .  

For additional technical information, contact PNC Inc. via phone at (973) 284-1600 or e-mail: info@pnconline.com

Share


Suggested Items

PCB Design, Fabrication and Use from the Mil-Aero End-User Perspective

08/28/2018 | Pete Starkey, I-Connect007
The procedures described for Rolls Royce were directly comparable with those described for MBDA, and the presenters were unanimous in re-emphasising the importance of working closely with their chosen PCB fabricators at all levels and all stages of design, qualification and production of their circuit boards.

Calumet Electronics on IMPACT 2018

08/14/2018 | Patty Goldman, I-Connect007
This year at IMPACT Washington, DC, I-Connect007's Patty Goldman sat down with Steve Vairo and Mike Kadlec of Calumet Electronics, to get their overview on the event.

Catching up with LiloTree’s Dr. Kunal Shah

08/02/2018 | Dan Beaulieu
Every so often, a new product comes around that promises to be a game changer and LiloTree has one of those products. Not only is it cyanide-free, it has the potential to save 40% on your entire ENIG process and is proving to be far more stable than traditional ENIG products.



Copyright © 2018 I-Connect007. All rights reserved.